内容

公共类型
公共函数
相关非成员
详细描述

QModbusDataUnit Class

QModbusDataUnit is a container class representing single bit and 16 bit word entries in the Modbus register. 更多...

头：	#include <QModbusDataUnit>
qmake:	QT += serialbus
Since:	Qt 5.8

所有成员列表，包括继承成员

公共类型

enum	RegisterType { Invalid, DiscreteInputs, Coils, InputRegisters, HoldingRegisters }

公共函数

	QModbusDataUnit ()
	QModbusDataUnit (QModbusDataUnit::RegisterType type )
	QModbusDataUnit (QModbusDataUnit::RegisterType type , int address , quint16 size )
	QModbusDataUnit (QModbusDataUnit::RegisterType type , int address , const QVector<quint16> & data )
bool	isValid () const
QModbusDataUnit::RegisterType	registerType () const
void	setRegisterType (QModbusDataUnit::RegisterType type )
void	setStartAddress (int address )
void	setValue (int index , quint16 value )
void	setValueCount (uint newCount )
void	setValues (const QVector<quint16> & 值 )
int	startAddress () const
quint16	value (int index ) const
uint	valueCount () const
QVector<quint16>	values () const

typedef

QModbusDataUnitMap

详细描述

QModbusDataUnit is a container class representing single bit and 16 bit word entries in the Modbus register.

QModbusDataUnit can be used for read and write operations. The entries are addressed via startAddress () 和 valueCount () number of contiguous entries. registerType () determines which register is used for the operations. Note that some registers are read-only registers.

The actual values () are either single bit or 16 bit based. QModbusDataUnit::DiscreteInputs and QModbusDataUnit::Coils only accept single bits. Therefore 0 is interpreted as 0 and anything else 1 .

成员类型文档编制

enum QModbusDataUnit:: RegisterType

This enum describes all supported register types.

常量	值	描述
`QModbusDataUnit::Invalid`	`0`	Set by the default constructor, do not use.
`QModbusDataUnit::DiscreteInputs`	`1`	This type of data can be provided by an I/O system.
`QModbusDataUnit::Coils`	`2`	This type of data can be alterable by an application program.
`QModbusDataUnit::InputRegisters`	`3`	This type of data can be provided by an I/O system.
`QModbusDataUnit::HoldingRegisters`	`4`	This type of data can be alterable by an application program.

成员函数文档编制

QModbusDataUnit:: QModbusDataUnit ()

构造空的，无效 QModbusDataUnit . Start address is set to -1 和 registerType 被设为 QModbusDataUnit::Invalid .

QModbusDataUnit:: QModbusDataUnit ( QModbusDataUnit::RegisterType type )

Constructs a unit of data for register type . Start address is set to 0 , data range and data values are empty.

QModbusDataUnit:: QModbusDataUnit ( QModbusDataUnit::RegisterType type , int address , quint16 size )

Constructs a unit of data for register type . Start address of the data is set to address and the size of the unit to size . The entries of values () are initialized with 0 .

QModbusDataUnit:: QModbusDataUnit ( QModbusDataUnit::RegisterType type , int address , const QVector < quint16 > & data )

Constructs a unit of data for register type . Start address of the data is set to address and the unit's values to data . The value count is implied by the data 尺寸。

bool QModbusDataUnit:: isValid () const

返回 true 若 QModbusDataUnit is valid; otherwise false 。 QModbusDataUnit is considered valid if the registerType () is not QModbusDataUnit::Invalid 和 startAddress () is greater than or equal to 0 .

QModbusDataUnit::RegisterType QModbusDataUnit:: registerType () const

Returns the type of the register.

另请参阅 setRegisterType () 和 QModbusDataUnit::RegisterType .

void QModbusDataUnit:: setRegisterType ( QModbusDataUnit::RegisterType type )

Sets the register type .

另请参阅 registerType () 和 QModbusDataUnit::RegisterType .

void QModbusDataUnit:: setStartAddress ( int address )

Sets the start address of the data unit.

另请参阅 startAddress ().

void QModbusDataUnit:: setValue ( int index , quint16 value )

Sets the register at position index to value .

另请参阅 value ().

void QModbusDataUnit:: setValueCount ( uint newCount )

Sets the size of the requested register's data block to newCount .

This may be different from values () size as this function is used to indicated the size of a data request. Only once the data request has been processed valueCount () is equal to the size of values ().

另请参阅 valueCount ().

void QModbusDataUnit:: setValues (const QVector < quint16 > & 值 )

设置值 of the data unit. QModbusDataUnit::DiscreteInputs and QModbusDataUnit::Coils tables only accept single bit value, so 0 is interpreted as 0 and anything else as 1 .

另请参阅 values ().

int QModbusDataUnit:: startAddress () const

Returns the start address of data unit in the register.

另请参阅 setStartAddress ().

quint16 QModbusDataUnit:: value ( int index ) const

Return the value at position index .

另请参阅 setValue ().

uint QModbusDataUnit:: valueCount () const

Returns the size of the requested register's data block or the size of data read from the device.

This function may not always return a count that equals values () size. Since this class is used to request data from the remote data register, the valueCount() can be used to indicate the size of the requested register's data block. Once the request has been processed, the valueCount() is equal to the size of values ().

另请参阅 setValueCount ().

QVector < quint16 > QModbusDataUnit:: values () const

Returns the data in the data unit. QModbusDataUnit::DiscreteInputs and QModbusDataUnit::Coils tables only accept single bit value, so 0 is interpreted as 0 and anything else as 1 .

另请参阅 setValues ().

内容