启用简单鼠标处理。 更多...
| import 语句： | import QtQuick 2.15 |
| 继承： |
A MouseArea is an invisible item that is typically used in conjunction with a visible item in order to provide mouse handling for that item. By effectively acting as a proxy, the logic for mouse handling can be contained within a MouseArea item.
The enabled property is used to enable and disable mouse handling for the proxied item. When disabled, the mouse area becomes transparent to mouse events.
MouseArea is an invisible Item, but it has a visible property. When set to false, the mouse area becomes transparent to mouse events.
The pressed read-only property indicates whether or not the user is holding down a mouse button over the mouse area. This property is often used in bindings between properties in a user interface. The containsMouse read-only property indicates the presence of the mouse cursor over the mouse area but, by default, only when a mouse button is held down; see the containsMouse 文档编制了解细节。
Information about the mouse position and button clicks are provided via signals for which event handler properties are defined. The most commonly used involved handling mouse presses and clicks: onClicked, onDoubleClicked, onPressed, onReleased and onPressAndHold. It's also possible to handle mouse wheel events via the onWheel signal.
If a MouseArea overlaps with the area of other MouseArea items, you can choose to propagate
clicked
,
doubleClicked
and
pressAndHold
events to these other items by setting
propagateComposedEvents
to true and rejecting events that should be propagated. See the
propagateComposedEvents
文档编制了解细节。
By default, MouseArea items only report mouse clicks and not changes to the position of the mouse cursor. Setting the hoverEnabled property ensures that handlers defined for onPositionChanged, onEntered and onExited are used and that the containsMouse property is updated even when no mouse buttons are pressed.
The following example uses a MouseArea in a Rectangle that changes the Rectangle color to red when clicked:
import QtQuick 2.0 Rectangle { width: 100; height: 100 color: "green" MouseArea { anchors.fill: parent onClicked: { parent.color = 'red' } } }
Many MouseArea signals pass a mouse parameter that contains additional information about the mouse event, such as the position, button, and any key modifiers.
Here is an extension of the previous example that produces a different color when the area is right clicked:
Rectangle { width: 100; height: 100 color: "green" MouseArea { anchors.fill: parent acceptedButtons: Qt.LeftButton | Qt.RightButton onClicked: { if (mouse.button == Qt.RightButton) parent.color = 'blue'; else parent.color = 'red'; } } }
另请参阅 MouseEvent , MouseArea example ，和 重要 Qt Quick 概念 - 用户输入 .
|
mouseX : real |
|
mouseY : real |
These properties hold the coordinates of the mouse cursor.
若 hoverEnabled property is false then these properties will only be valid while a button is pressed, and will remain valid as long as the button is held down even if the mouse is moved outside the area.
默认情况下，此特性为 false。
若 hoverEnabled is true then these properties will be valid when:
The coordinates are relative to the MouseArea .
This property holds the mouse buttons that the mouse area reacts to.
To specify that the MouseArea will react to multiple buttons, Qt::MouseButtons flag values are combined using the "|" (or) operator:
MouseArea { acceptedButtons: Qt.LeftButton | Qt.RightButton }
To indicate that all possible mouse buttons are to be accepted, the special value 'Qt.AllButtons' may be used:
MouseArea { acceptedButtons: Qt.AllButtons }
默认值为
Qt.LeftButton
.
|
containsMouse : bool |
This property holds whether the mouse is currently inside the mouse area.
警告： 若 hoverEnabled is false, containsMouse will only be valid when the mouse is pressed while the mouse cursor is inside the MouseArea .
|
containsPress : bool |
This is a convenience property equivalent to
pressed && containsMouse
, i.e. it holds whether any of the
acceptedButtons
are currently pressed and the mouse is currently within the
MouseArea
.
This property is particularly useful for highlighting an item while the mouse is pressed within its bounds.
该特性在 Qt 5.4 引入。
另请参阅 pressed and containsMouse .
This property holds the cursor shape for this mouse area. Note that on platforms that do not display a mouse cursor this may have no effect.
The available cursor shapes are:
In order to only set a mouse cursor shape for a region without reacting to mouse events set the acceptedButtons to none:
MouseArea { cursorShape: Qt.IBeamCursor; acceptedButtons: Qt.NoButton }
默认值为
Qt.ArrowCursor
.
另请参阅 Qt::CursorShape .
|
drag group |
|---|
|
drag.active : bool |
|
drag.axis : enumeration |
|
drag.filterChildren : bool |
|
drag.maximumX : real |
|
drag.maximumY : real |
|
drag.minimumX : real |
|
drag.minimumY : real |
|
drag.smoothed : bool |
|
drag.target : Item |
|
drag.threshold : real |
drag
provides a convenient way to make an item draggable.
drag.target
specifies the id of the item to drag.
drag.active
specifies if the target item is currently being dragged.
drag.axis
specifies whether dragging can be done horizontally (
Drag.XAxis
), vertically (
Drag.YAxis
), or both (
Drag.XAndYAxis
)
drag.minimum
and
drag.maximum
limit how far the target can be dragged along the corresponding axes.
The following example displays a Rectangle that can be dragged along the X-axis. The opacity of the rectangle is reduced when it is dragged to the right.
Rectangle { id: container width: 600; height: 200 Rectangle { id: rect width: 50; height: 50 color: "red" opacity: (600.0 - rect.x) / 600 MouseArea { anchors.fill: parent drag.target: rect drag.axis: Drag.XAxis drag.minimumX: 0 drag.maximumX: container.width - rect.width } } }
注意：
Items cannot be dragged if they are anchored for the requested
drag.axis
. For example, if
anchors.left
or
anchors.right
was set for
rect
in the above example, it cannot be dragged along the X-axis. This can be avoided by settng the anchor value to
undefined
in an
onPressed
handler.
若
drag.filterChildren
is set to true, a drag can override descendant MouseAreas. This enables a parent
MouseArea
to handle drags, for example, while descendants handle clicks:
drag.threshold
determines the threshold in pixels of when the drag operation should start. By default this is bound to a platform dependent value. This property was added in Qt Quick 2.2.
若
drag.smoothed
is
true
, the target will be moved only after the drag operation has started. If set to
false
, the target will be moved straight to the current mouse position. By default, this property is
true
. This property was added in Qt Quick 2.4
见 Drag attached property and DropArea if you want to make a drop.
import QtQuick 2.0 Rectangle { width: 480 height: 320 Rectangle { x: 30; y: 30 width: 300; height: 240 color: "lightsteelblue" MouseArea { anchors.fill: parent drag.target: parent; drag.axis: "XAxis" drag.minimumX: 30 drag.maximumX: 150 drag.filterChildren: true Rectangle { color: "yellow" x: 50; y : 50 width: 100; height: 100 MouseArea { anchors.fill: parent onClicked: console.log("Clicked") } } } } }
|
enabled : bool |
This property holds whether the item accepts mouse events.
注意： Due to historical reasons, this property is not equivalent to Item.enabled. It only affects mouse events, and its effect does not propagate to child items.
默认情况下，此特性为 true。
|
hoverEnabled : bool |
This property holds whether hover events are handled.
By default, mouse events are only handled in response to a button event, or when a button is pressed. Hover enables handling of all mouse events even when no mouse button is pressed.
This property affects the containsMouse property and the onEntered, onExited and onPositionChanged signals.
|
pressAndHoldInterval : int |
This property overrides the elapsed time in milliseconds before
pressAndHold
is emitted.
If not explicitly set -- or after reset -- the value follows
QStyleHints::mousePressAndHoldInterval
.
Typically it's sufficient to set this property globally using the application style hint. This property should be used when varying intervals are needed for certain MouseAreas.
该特性在 Qt 5.9 引入。
另请参阅 pressAndHold .
|
pressed : bool |
This property holds whether any of the acceptedButtons are currently pressed.
This property holds the mouse buttons currently pressed.
It contains a bitwise combination of:
The code below displays "right" when the right mouse buttons is pressed:
Text { text: mouseArea.pressedButtons & Qt.RightButton ? "right" : "" horizontalAlignment: Text.AlignHCenter verticalAlignment: Text.AlignVCenter MouseArea { id: mouseArea anchors.fill: parent acceptedButtons: Qt.LeftButton | Qt.RightButton } }
注意： this property only handles buttons specified in acceptedButtons .
另请参阅 acceptedButtons .
|
preventStealing : bool |
This property holds whether the mouse events may be stolen from this MouseArea .
若 MouseArea is placed within an item that filters child mouse events, such as Flickable, the mouse events may be stolen from the MouseArea if a gesture is recognized by the parent item, e.g. a flick gesture. If preventStealing is set to true, no item will steal the mouse events.
Note that setting preventStealing to true once an item has started stealing events will have no effect until the next press event.
By default this property is false.
|
propagateComposedEvents : bool |
This property holds whether composed mouse events will automatically propagate to other MouseAreas that overlap with this MouseArea but are lower in the visual stacking order. By default, this property is false.
MouseArea
contains several composed events:
clicked
,
doubleClicked
and
pressAndHold
. These are composed of basic mouse events, like
pressed
, and can be propagated differently in comparison to basic events.
If propagateComposedEvents is set to true, then composed events will be automatically propagated to other MouseAreas in the same location in the scene. Each event is propagated to the next
enabled
MouseArea
beneath it in the stacking order, propagating down this visual hierarchy until a
MouseArea
accepts the event. Unlike
pressed
events, composed events will not be automatically accepted if no handler is present.
For example, below is a yellow
Rectangle
that contains a blue
Rectangle
. The blue rectangle is the top-most item in the hierarchy of the visual stacking order; it will visually rendered above the yellow rectangle. Since the blue rectangle sets propagateComposedEvents to true, and also sets
MouseEvent::accepted
to false for all received
clicked
events, any
clicked
events it receives are propagated to the
MouseArea
of the yellow rectangle beneath it.
import QtQuick 2.0 Rectangle { color: "yellow" width: 100; height: 100 MouseArea { anchors.fill: parent onClicked: console.log("clicked yellow") } Rectangle { color: "blue" width: 50; height: 50 MouseArea { anchors.fill: parent propagateComposedEvents: true onClicked: { console.log("clicked blue") mouse.accepted = false } } } }
Clicking on the blue rectangle will cause the
onClicked
handler of its child
MouseArea
to be invoked; the event will then be propagated to the
MouseArea
of the yellow rectangle, causing its own
onClicked
handler to be invoked.
This property greatly simplifies the usecase of when you want to have overlapping MouseAreas handling the composed events together. For example: if you want one
MouseArea
to handle
clicked
signals and the other to handle
pressAndHold
, or if you want one
MouseArea
to handle
clicked
most of the time, but pass it through when certain conditions are met.
|
scrollGestureEnabled : bool |
This property controls whether this MouseArea responds to scroll gestures from non-mouse devices, such as the 2-finger flick gesture on a trackpad. If set to false, the wheel signal be emitted only when the wheel event comes from an actual mouse with a wheel, while scroll gesture events will pass through to any other Item that will handle them. For example, the user might perform a flick gesture while the cursor is over an item containing a MouseArea , intending to interact with a Flickable which is underneath. Setting this property to false will allow the PinchArea to handle the mouse wheel or the pinch gesture, while the Flickable handles the flick gesture.
默认情况下，此特性为 true。
该特性在 Qt 5.5 引入。
This signal is emitted when mouse events have been canceled, because another item stole the mouse event handling.
This signal is for advanced use: it is useful when there is more than one
MouseArea
that is handling input, or when there is a
MouseArea
在
Flickable
. In the latter case, if you execute some logic in the
onPressed
signal handler and then start dragging, the
Flickable
will steal the mouse handling from the
MouseArea
. In these cases, to reset the logic when the
MouseArea
has lost the mouse handling to the
Flickable
,
canceled
should be handled in addition to
released
.
注意：
相应处理程序是
onCanceled
.
|
clicked ( MouseEvent mouse ) |
This signal is emitted when there is a click. A click is defined as a press followed by a release, both inside the MouseArea (pressing, moving outside the MouseArea , and then moving back inside and releasing is also considered a click).
The mouse parameter provides information about the click, including the x and y position of the release of the click, and whether the click was held.
When handling this signal, changing the
accepted
特性为
mouse
parameter has no effect, unless the
propagateComposedEvents
特性为
true
.
注意：
相应处理程序是
onClicked
.
|
doubleClicked ( MouseEvent mouse ) |
This signal is emitted when there is a double-click (a press followed by a release followed by a press). The mouse parameter provides information about the click, including the x and y position of the release of the click, and whether the click was held.
When handling this signal, if the
accepted
特性为
mouse
parameter is set to false, the pressed/released/clicked signals will be emitted for the second click; otherwise they are suppressed. The
accepted
property defaults to true.
注意：
相应处理程序是
onDoubleClicked
.
This signal is emitted when the mouse enters the mouse area.
By default this signal is only emitted if a button is currently pressed. Set hoverEnabled to true to emit this signal even when no mouse button is pressed.
注意：
相应处理程序是
onEntered
.
另请参阅 hoverEnabled .
This signal is emitted when the mouse exits the mouse area.
By default this signal is only emitted if a button is currently pressed. Set hoverEnabled to true to emit this signal even when no mouse button is pressed.
The example below shows a fairly typical relationship between two MouseAreas, with
mouseArea2
on top of
mouseArea1
. Moving the mouse into
mouseArea2
from
mouseArea1
will cause
mouseArea1
to emit the
exited
信号。
Rectangle { width: 400; height: 400 MouseArea { id: mouseArea1 anchors.fill: parent hoverEnabled: true } MouseArea { id: mouseArea2 width: 100; height: 100 anchors.centerIn: parent hoverEnabled: true } }
If instead you give the two MouseAreas a parent-child relationship, moving the mouse into
mouseArea2
from
mouseArea1
will
not
cause
mouseArea1
以发射
exited
. Instead, they will both be considered to be simultaneously hovered.
注意：
相应处理程序是
onExited
.
另请参阅 hoverEnabled .
|
positionChanged ( MouseEvent mouse ) |
This signal is emitted when the mouse position changes.
The mouse parameter provides information about the mouse, including the x and y position, and any buttons currently pressed.
By default this signal is only emitted if a button is currently pressed. Set hoverEnabled to true to emit this signal even when no mouse button is pressed.
When handling this signal, changing the accepted 特性为 mouse parameter has no effect.
注意：
相应处理程序是
onPositionChanged
.
|
pressAndHold ( MouseEvent mouse ) |
This signal is emitted when there is a long press (currently 800ms). The mouse parameter provides information about the press, including the x and y position of the press, and which button is pressed.
When handling this signal, changing the
accepted
特性为
mouse
parameter has no effect, unless the
propagateComposedEvents
特性为
true
.
注意：
相应处理程序是
onPressAndHold
.
|
pressed ( MouseEvent mouse ) |
This signal is emitted when there is a press. The mouse parameter provides information about the press, including the x and y position and which button was pressed.
When handling this signal, use the accepted 特性为 mouse parameter to control whether this MouseArea handles the press and all future mouse events until release. The default is to accept the event and not allow other MouseAreas beneath this one to handle the event. If accepted is set to false, no further events will be sent to this MouseArea until the button is next pressed.
注意：
相应处理程序是
onPressed
.
|
released ( MouseEvent mouse ) |
This signal is emitted when there is a release. The mouse parameter provides information about the click, including the x and y position of the release of the click, and whether the click was held.
When handling this signal, changing the accepted 特性为 mouse parameter has no effect.
注意：
相应处理程序是
onReleased
.
另请参阅 canceled .
|
wheel ( WheelEvent wheel ) |
This signal is emitted in response to both mouse wheel and trackpad scroll gestures.
The wheel parameter provides information about the event, including the x and y position, any buttons currently pressed, and information about the wheel movement, including angleDelta and pixelDelta.
注意：
相应处理程序是
onWheel
.