The QNmeaPositionInfoSource class provides positional information using a NMEA data source. 更多...
| 头： | #include <QNmeaPositionInfoSource> |
| qmake: | QT += positioning |
| Since: | Qt 5.2 |
| 继承： | QGeoPositionInfoSource |
该类在 Qt 5.2 引入。
| enum | UpdateMode { RealTimeMode, SimulationMode } |
| QNmeaPositionInfoSource (QNmeaPositionInfoSource::UpdateMode updateMode , QObject * parent = nullptr) | |
| virtual | ~QNmeaPositionInfoSource () |
| QIODevice * | device () const |
| void | setDevice (QIODevice * device ) |
| void | setUserEquivalentRangeError (double uere ) |
| QNmeaPositionInfoSource::UpdateMode | updateMode () const |
| double | userEquivalentRangeError () const |
| virtual QGeoPositionInfoSource::Error | error () const override |
| virtual QGeoPositionInfo | lastKnownPosition (bool fromSatellitePositioningMethodsOnly = false) const override |
| virtual int | minimumUpdateInterval () const override |
| virtual void | setUpdateInterval (int msec ) override |
| virtual QGeoPositionInfoSource::PositioningMethods | supportedPositioningMethods () const override |
| virtual void | requestUpdate (int msec = 0) override |
| virtual void | startUpdates () override |
| virtual void | stopUpdates () override |
| virtual bool | parsePosInfoFromNmeaData (const char * data , int size , QGeoPositionInfo * posInfo , bool * hasFix ) |
NMEA is a commonly used protocol for the specification of one's global position at a certain point in time. The QNmeaPositionInfoSource class reads NMEA data and uses it to provide positional data in the form of QGeoPositionInfo 对象。
A QNmeaPositionInfoSource instance operates in either RealTimeMode or SimulationMode . These modes allow NMEA data to be read from either a live source of positional data, or replayed for simulation purposes from previously recorded NMEA data.
The source of NMEA data is set with setDevice ().
使用 startUpdates () to start receiving regular position updates and stopUpdates () to stop these updates. If you only require updates occasionally, you can call requestUpdate () to request a single update.
In both cases the position information is received via the positionUpdated () signal and the last known position can be accessed with lastKnownPosition ().
QNmeaPositionInfoSource supports reporting the accuracy of the horizontal and vertical position. To enable position accuracy reporting an estimate of the User Equivalent Range Error associated with the NMEA source must be set with setUserEquivalentRangeError ().
Defines the available update modes.
| 常量 | 值 | 描述 |
|---|---|---|
QNmeaPositionInfoSource::RealTimeMode
|
1
|
Positional data is read and distributed from the data source as it becomes available. Use this mode if you are using a live source of positional data (for example, a GPS hardware device). |
QNmeaPositionInfoSource::SimulationMode
|
2
|
The data and time information in the NMEA source data is used to provide positional updates at the rate at which the data was originally recorded. Use this mode if the data source contains previously recorded NMEA data and you want to replay the data for simulation purposes. |
Constructs a QNmeaPositionInfoSource instance with the given parent and updateMode .
[override virtual slot]
void
QNmeaPositionInfoSource::
requestUpdate
(
int
msec
= 0)
重实现： QGeoPositionInfoSource::requestUpdate (int timeout).
[override virtual slot]
void
QNmeaPositionInfoSource::
startUpdates
()
重实现： QGeoPositionInfoSource::startUpdates ().
[override virtual slot]
void
QNmeaPositionInfoSource::
stopUpdates
()
重实现： QGeoPositionInfoSource::stopUpdates ().
[虚拟]
QNmeaPositionInfoSource::
~QNmeaPositionInfoSource
()
Destroys the position source.
Returns the NMEA data source.
另请参阅 setDevice ().
[override virtual]
QGeoPositionInfoSource::Error
QNmeaPositionInfoSource::
error
() const
重实现： QGeoPositionInfoSource::error () const.
[override virtual]
QGeoPositionInfo
QNmeaPositionInfoSource::
lastKnownPosition
(
bool
fromSatellitePositioningMethodsOnly
= false) const
重实现： QGeoPositionInfoSource::lastKnownPosition (bool fromSatellitePositioningMethodsOnly) const.
[override virtual]
int
QNmeaPositionInfoSource::
minimumUpdateInterval
() const
重实现访问函数为特性： QGeoPositionInfoSource::minimumUpdateInterval .
[virtual protected]
bool
QNmeaPositionInfoSource::
parsePosInfoFromNmeaData
(const
char
*
data
,
int
size
,
QGeoPositionInfo
*
posInfo
,
bool
*
hasFix
)
Parses an NMEA sentence string into a QGeoPositionInfo .
The default implementation will parse standard NMEA sentences. This method should be reimplemented in a subclass whenever the need to deal with non-standard NMEA sentences arises.
The parser reads size 字节来自 data and uses that information to setup posInfo and hasFix 。若 hasFix is set to false then posInfo may contain only the time or the date and the time.
Returns true if the sentence was succsesfully parsed, otherwise returns false and should not modifiy posInfo or hasFix .
Sets the NMEA data source to device . If the device is not open, it will be opened in QIODevice::ReadOnly 模式。
The source device can only be set once and must be set before calling startUpdates () 或 requestUpdate ().
注意： The device must emit QIODevice::readyRead () for the source to be notified when data is available for reading. QNmeaPositionInfoSource does not assume the ownership of the device, and hence does not deallocate it upon destruction.
另请参阅 device ().
[override virtual]
void
QNmeaPositionInfoSource::
setUpdateInterval
(
int
msec
)
重实现访问函数为特性： QGeoPositionInfoSource::updateInterval .
Sets the User Equivalent Range Error (UERE) to uere . The UERE is used in calculating an estimate of the accuracy of the position information reported by the position info source. The UERE should be set to a value appropriate for the GPS device which generated the NMEA stream.
The true UERE value is calculated from multiple error sources including errors introduced by the satellites and signal propogation delays through the atmosphere as well as errors introduced by the receiving GPS equipment. For details on GPS accuracy see http://edu-observatory.org/gps/gps_accuracy.html .
A typical value for UERE is approximately 5.1.
该函数在 Qt 5.3 引入。
另请参阅 userEquivalentRangeError ().
[override virtual]
QGeoPositionInfoSource::PositioningMethods
QNmeaPositionInfoSource::
supportedPositioningMethods
() const
重实现： QGeoPositionInfoSource::supportedPositioningMethods () const.
Returns the update mode.
Returns the current User Equivalent Range Error (UERE). The UERE is used in calculating an estimate of the accuracy of the position information reported by the position info source. The default value is NaN which means no accuracy information will be provided.
该函数在 Qt 5.3 引入。
另请参阅 setUserEquivalentRangeError ().