内容

• 公共类型
• 公共函数
• 公共槽
• 信号
• 保护函数
• 保护槽
• 详细描述
• 子类化

QAbstractItemModel 类

QAbstractItemModel class provides the abstract interface for item model classes. 更多...

头：	#include <QAbstractItemModel>
qmake:	QT += core
继承：	QObject
继承者：	QAbstractListModel , QAbstractProxyModel , QAbstractTableModel , QDirModel , QFileSystemModel , QHelpContentModel ，和 QStandardItemModel

• 所有成员列表，包括继承成员
• 过时成员

公共类型

enum	LayoutChangeHint { NoLayoutChangeHint, VerticalSortHint, HorizontalSortHint }

公共函数

	QAbstractItemModel (QObject * parent = Q_NULLPTR)
virtual	~QAbstractItemModel ()
virtual QModelIndex	buddy (const QModelIndex & index ) const
virtual bool	canDropMimeData (const QMimeData * data , Qt::DropAction action , int row , int column , const QModelIndex & parent ) const
virtual bool	canFetchMore (const QModelIndex & parent ) const
virtual int	columnCount (const QModelIndex & parent = QModelIndex()) const = 0
virtual QVariant	data (const QModelIndex & index , int role = Qt::DisplayRole) const = 0
virtual bool	dropMimeData (const QMimeData * data , Qt::DropAction action , int row , int column , const QModelIndex & parent )
virtual void	fetchMore (const QModelIndex & parent )
virtual Qt::ItemFlags	flags (const QModelIndex & index ) const
virtual bool	hasChildren (const QModelIndex & parent = QModelIndex()) const
bool	hasIndex (int row , int column , const QModelIndex & parent = QModelIndex()) const
virtual QVariant	headerData (int section , Qt::Orientation orientation , int role = Qt::DisplayRole) const
virtual QModelIndex	index (int row , int column , const QModelIndex & parent = QModelIndex()) const = 0
bool	insertColumn (int column , const QModelIndex & parent = QModelIndex())
virtual bool	insertColumns (int column , int count , const QModelIndex & parent = QModelIndex())
bool	insertRow (int row , const QModelIndex & parent = QModelIndex())
virtual bool	insertRows (int row , int count , const QModelIndex & parent = QModelIndex())
virtual QMap<int, QVariant>	itemData (const QModelIndex & index ) const
virtual QModelIndexList	match (const QModelIndex & start , int role , const QVariant & value , int hits = 1, Qt::MatchFlags flags = Qt::MatchFlags( Qt::MatchStartsWith | Qt::MatchWrap )) const
virtual QMimeData *	mimeData (const QModelIndexList & indexes ) const
virtual QStringList	mimeTypes () const
bool	moveColumn (const QModelIndex & sourceParent , int sourceColumn , const QModelIndex & destinationParent , int destinationChild )
virtual bool	moveColumns (const QModelIndex & sourceParent , int sourceColumn , int count , const QModelIndex & destinationParent , int destinationChild )
bool	moveRow (const QModelIndex & sourceParent , int sourceRow , const QModelIndex & destinationParent , int destinationChild )
virtual bool	moveRows (const QModelIndex & sourceParent , int sourceRow , int count , const QModelIndex & destinationParent , int destinationChild )
virtual QModelIndex	parent (const QModelIndex & index ) const = 0
bool	removeColumn (int column , const QModelIndex & parent = QModelIndex())
virtual bool	removeColumns (int column , int count , const QModelIndex & parent = QModelIndex())
bool	removeRow (int row , const QModelIndex & parent = QModelIndex())
virtual bool	removeRows (int row , int count , const QModelIndex & parent = QModelIndex())
virtual QHash<int, QByteArray>	roleNames () const
virtual int	rowCount (const QModelIndex & parent = QModelIndex()) const = 0
virtual bool	setData (const QModelIndex & index , const QVariant & value , int role = Qt::EditRole)
virtual bool	setHeaderData (int section , Qt::Orientation orientation , const QVariant & value , int role = Qt::EditRole)
virtual bool	setItemData (const QModelIndex & index , const QMap<int, QVariant> & roles )
virtual QModelIndex	sibling (int row , int column , const QModelIndex & index ) const
virtual void	sort (int column , Qt::SortOrder order = Qt::AscendingOrder)
virtual QSize	span (const QModelIndex & index ) const
virtual Qt::DropActions	supportedDragActions () const
virtual Qt::DropActions	supportedDropActions () const

• 32 公共函数继承自 QObject

公共槽

virtual void	revert ()
virtual bool	submit ()

• 1 公共槽继承自 QObject

信号

void	columnsAboutToBeInserted (const QModelIndex & parent , int first , int last )
void	columnsAboutToBeMoved (const QModelIndex & sourceParent , int sourceStart , int sourceEnd , const QModelIndex & destinationParent , int destinationColumn )
void	columnsAboutToBeRemoved (const QModelIndex & parent , int first , int last )
void	columnsInserted (const QModelIndex & parent , int first , int last )
void	columnsMoved (const QModelIndex & parent , int start , int end , const QModelIndex & destination , int column )
void	columnsRemoved (const QModelIndex & parent , int first , int last )
void	dataChanged (const QModelIndex & topLeft , const QModelIndex & bottomRight , const QVector<int> & roles = QVector<int> ())
void	headerDataChanged (Qt::Orientation orientation , int first , int last )
void	layoutAboutToBeChanged (const QList<QPersistentModelIndex> & parents = QList<QPersistentModelIndex> (), QAbstractItemModel::LayoutChangeHint hint = QAbstractItemModel::NoLayoutChangeHint)
void	layoutChanged (const QList<QPersistentModelIndex> & parents = QList<QPersistentModelIndex> (), QAbstractItemModel::LayoutChangeHint hint = QAbstractItemModel::NoLayoutChangeHint)
void	modelAboutToBeReset ()
void	modelReset ()
void	rowsAboutToBeInserted (const QModelIndex & parent , int start , int end )
void	rowsAboutToBeMoved (const QModelIndex & sourceParent , int sourceStart , int sourceEnd , const QModelIndex & destinationParent , int destinationRow )
void	rowsAboutToBeRemoved (const QModelIndex & parent , int first , int last )
void	rowsInserted (const QModelIndex & parent , int first , int last )
void	rowsMoved (const QModelIndex & parent , int start , int end , const QModelIndex & destination , int row )
void	rowsRemoved (const QModelIndex & parent , int first , int last )

• 2 信号继承自 QObject

保护函数

void	beginInsertColumns (const QModelIndex & parent , int first , int last )
void	beginInsertRows (const QModelIndex & parent , int first , int last )
bool	beginMoveColumns (const QModelIndex & sourceParent , int sourceFirst , int sourceLast , const QModelIndex & destinationParent , int destinationChild )
bool	beginMoveRows (const QModelIndex & sourceParent , int sourceFirst , int sourceLast , const QModelIndex & destinationParent , int destinationChild )
void	beginRemoveColumns (const QModelIndex & parent , int first , int last )
void	beginRemoveRows (const QModelIndex & parent , int first , int last )
void	beginResetModel ()
void	changePersistentIndex (const QModelIndex & from , const QModelIndex & to )
void	changePersistentIndexList (const QModelIndexList & from , const QModelIndexList & to )
QModelIndex	createIndex (int row , int column , void * ptr = Q_NULLPTR) const
QModelIndex	createIndex (int row , int column , quintptr id ) const
void	endInsertColumns ()
void	endInsertRows ()
void	endMoveColumns ()
void	endMoveRows ()
void	endRemoveColumns ()
void	endRemoveRows ()
void	endResetModel ()
QModelIndexList	persistentIndexList () const

• 9 保护函数继承自 QObject

保护槽

void	resetInternalData ()

额外继承成员

• 1 特性继承自 QObject
• 11 静态公共成员继承自 QObject

详细描述

QAbstractItemModel class provides the abstract interface for item model classes.

QAbstractItemModel class defines the standard interface that item models must use to be able to interoperate with other components in the model/view architecture. It is not supposed to be instantiated directly. Instead, you should subclass it to create new models.

QAbstractItemModel 类是一种 模型/视图类 且属于 Qt 的 模型/视图框架 。它可以用作 QML 中项视图元素或 Qt Widgets 模块中项视图类的底层数据模型。

若需要模型以用于项视图，譬如 QML 列表视图元素或 C++ 小部件 QListView or QTableView ，应考虑子类化 QAbstractListModel or QAbstractTableModel 而不是此类。

底层数据模型以表层次结构形式向视图和委托暴露。若不使用层次结构，模型就是简单行/列表。每项拥有唯一索引指定通过 QModelIndex .

Every item of data that can be accessed via a model has an associated model index. You can obtain this model index using the index () function. Each index may have a sibling () index; child items have a parent () index.

Each item has a number of data elements associated with it and they can be retrieved by specifying a role (see Qt::ItemDataRole ) to the model's data () function. Data for all available roles can be obtained at the same time using the itemData () 函数。

Data for each role is set using a particular Qt::ItemDataRole . Data for individual roles are set individually with setData (), or they can be set for all roles with setItemData ().

可以查询项采用 flags () (见 Qt::ItemFlag ) to see if they can be selected, dragged, or manipulated in other ways.

若项拥有子级对象， hasChildren () 返回 true 对于相应索引。

The model has a rowCount () 和 columnCount () for each level of the hierarchy. Rows and columns can be inserted and removed with insertRows (), insertColumns (), removeRows ()，和 removeColumns ().

The model emits signals to indicate changes. For example, dataChanged () is emitted whenever items of data made available by the model are changed. Changes to the headers supplied by the model cause headerDataChanged () to be emitted. If the structure of the underlying data changes, the model can emit layoutChanged () to indicate to any attached views that they should redisplay any items shown, taking the new structure into account.

The items available through the model can be searched for particular data using the match () 函数。

要排序模型，可以使用 sort ().

子类化

注意： Some general guidelines for subclassing models are available in the 模型子类化参考 .

当子类化 QAbstractItemModel , at the very least you must implement index (), parent (), rowCount (), columnCount ()，和 data (). These functions are used in all read-only models, and form the basis of editable models.

You can also reimplement hasChildren () to provide special behavior for models where the implementation of rowCount () is expensive. This makes it possible for models to restrict the amount of data requested by views, and can be used as a way to implement lazy population of model data.

To enable editing in your model, you must also implement setData (), and reimplement flags () to ensure that ItemIsEditable is returned. You can also reimplement headerData () 和 setHeaderData () to control the way the headers for your model are presented.

dataChanged () 和 headerDataChanged () signals must be emitted explicitly when reimplementing the setData () 和 setHeaderData () 函数，分别。

Custom models need to create model indexes for other components to use. To do this, call createIndex () with suitable row and column numbers for the item, and an identifier for it, either as a pointer or as an integer value. The combination of these values must be unique for each item. Custom models typically use these unique identifiers in other reimplemented functions to retrieve item data and access information about the item's parents and children. See the 简单树模型范例 for more information about unique identifiers.

It is not necessary to support every role defined in Qt::ItemDataRole . Depending on the type of data contained within a model, it may only be useful to implement the data () function to return valid information for some of the more common roles. Most models provide at least a textual representation of item data for the Qt::DisplayRole , and well-behaved models should also provide valid information for the Qt::ToolTipRole and Qt::WhatsThisRole . Supporting these roles enables models to be used with standard Qt views. However, for some models that handle highly-specialized data, it may be appropriate to provide data only for user-defined roles.

Models that provide interfaces to resizable data structures can provide implementations of insertRows (), removeRows (), insertColumns (),and removeColumns (). When implementing these functions, it is important to notify any connected views about changes to the model's dimensions both before and after they occur:

• An insertRows () implementation must call beginInsertRows () before inserting new rows into the data structure, and endInsertRows () immediately afterwards .
• An insertColumns () implementation must call beginInsertColumns () before inserting new columns into the data structure, and endInsertColumns () immediately afterwards .
• A removeRows () implementation must call beginRemoveRows () before the rows are removed from the data structure, and endRemoveRows () immediately afterwards .
• A removeColumns () implementation must call beginRemoveColumns () before the columns are removed from the data structure, and endRemoveColumns () immediately afterwards .

private signals that these functions emit give attached components the chance to take action before any data becomes unavailable. The encapsulation of the insert and remove operations with these begin and end functions also enables the model to manage persistent model indexes correctly. If you want selections to be handled properly, you must ensure that you call these functions. If you insert or remove an item with children, you do not need to call these functions for the child items. In other words, the parent item will take care of its child items.

To create models that populate incrementally, you can reimplement fetchMore () 和 canFetchMore (). If the reimplementation of fetchMore () adds rows to the model, beginInsertRows() and endInsertRows() must be called.

另请参阅 模型类 , 模型子类化参考 , QModelIndex , QAbstractItemView , 将拖放用于项视图 , 简单 DOM 模型范例 , 简单树模型范例 , 可编辑树模型范例 ，和 抓取更多范例 .

成员类型文档编制

enum QAbstractItemModel:: LayoutChangeHint

This enum describes the way the model changes layout.

常量	值	描述
QAbstractItemModel::NoLayoutChangeHint	0	No hint is available.
QAbstractItemModel::VerticalSortHint	1	Rows are being sorted.
QAbstractItemModel::HorizontalSortHint	2	Columns are being sorted.

Note that VerticalSortHint and HorizontalSortHint carry the meaning that items are being moved within the same parent, not moved to a different parent in the model, and not filtered out or in.

成员函数文档编制

QAbstractItemModel:: QAbstractItemModel ( QObject * parent = Q_NULLPTR)

构造抽象项模型采用给定 parent .

[virtual] QAbstractItemModel:: ~QAbstractItemModel ()

销毁抽象项模型。

[protected] void QAbstractItemModel:: beginInsertColumns (const QModelIndex & parent , int first , int last )

开始列插入操作。

When reimplementing insertColumns () in a subclass, you must call this function before inserting data into the model's underlying data store.

parent index corresponds to the parent into which the new columns are inserted; first and last are the column numbers of the new columns will have after they have been inserted.

	Specify the first and last column numbers for the span of columns you want to insert into an item in a model. For example, as shown in the diagram, we insert three columns before column 4, so first is 4 and last is 6: beginInsertColumns(parent, 4, 6); This inserts the three new columns as columns 4, 5, and 6.
	To append columns, insert them after the last column. For example, as shown in the diagram, we append three columns to a collection of six existing columns (ending in column 5), so first is 6 and last is 8: beginInsertColumns(parent, 6, 8); This appends the two new columns as columns 6, 7, and 8.

注意： 此函数发射 columnsAboutToBeInserted () signal which connected views (or proxies) must handle before the data is inserted. Otherwise, the views may end up in an invalid state.

另请参阅 endInsertColumns ().

[protected] void QAbstractItemModel:: beginInsertRows (const QModelIndex & parent , int first , int last )

开始行插入操作。

When reimplementing insertRows () in a subclass, you must call this function before inserting data into the model's underlying data store.

parent index corresponds to the parent into which the new rows are inserted; first and last are the row numbers that the new rows will have after they have been inserted.

	Specify the first and last row numbers for the span of rows you want to insert into an item in a model. For example, as shown in the diagram, we insert three rows before row 2, so first is 2 and last is 4: beginInsertRows(parent, 2, 4); This inserts the three new rows as rows 2, 3, and 4.
	To append rows, insert them after the last row. For example, as shown in the diagram, we append two rows to a collection of 4 existing rows (ending in row 3), so first is 4 and last is 5: beginInsertRows(parent, 4, 5); This appends the two new rows as rows 4 and 5.

注意： 此函数发射 rowsAboutToBeInserted () signal which connected views (or proxies) must handle before the data is inserted. Otherwise, the views may end up in an invalid state.

另请参阅 endInsertRows ().

[protected] bool QAbstractItemModel:: beginMoveColumns (const QModelIndex & sourceParent , int sourceFirst , int sourceLast , const QModelIndex & destinationParent , int destinationChild )

开始列移动操作。

When reimplementing a subclass, this method simplifies moving entities in your model. This method is responsible for moving persistent indexes in the model, which you would otherwise be required to do yourself. Using beginMoveColumns and endMoveColumns is an alternative to emitting layoutAboutToBeChanged and layoutChanged directly along with changePersistentIndex .

sourceParent index corresponds to the parent from which the columns are moved; sourceFirst and sourceLast are the first and last column numbers of the columns to be moved. The destinationParent index corresponds to the parent into which those columns are moved. The destinationChild is the column to which the columns will be moved. That is, the index at column sourceFirst in sourceParent will become column destinationChild in destinationParent , followed by all other columns up to sourceLast .

However, when moving columns down in the same parent ( sourceParent and destinationParent are equal), the columns will be placed before the destinationChild index. That is, if you wish to move columns 0 and 1 so they will become columns 1 and 2, destinationChild should be 3. In this case, the new index for the source column i (which is between sourceFirst and sourceLast ) is equal to (destinationChild-sourceLast-1+i) .

注意，若 sourceParent and destinationParent are the same, you must ensure that the destinationChild is not within the range of sourceFirst and sourceLast + 1. You must also ensure that you do not attempt to move a column to one of its own children or ancestors. This method returns false if either condition is true, in which case you should abort your move operation.

该函数在 Qt 4.6 引入。

另请参阅 endMoveColumns ().

[protected] bool QAbstractItemModel:: beginMoveRows (const QModelIndex & sourceParent , int sourceFirst , int sourceLast , const QModelIndex & destinationParent , int destinationChild )

开始行移动操作。

When reimplementing a subclass, this method simplifies moving entities in your model. This method is responsible for moving persistent indexes in the model, which you would otherwise be required to do yourself. Using beginMoveRows and endMoveRows is an alternative to emitting layoutAboutToBeChanged and layoutChanged directly along with changePersistentIndex .

sourceParent index corresponds to the parent from which the rows are moved; sourceFirst and sourceLast are the first and last row numbers of the rows to be moved. The destinationParent index corresponds to the parent into which those rows are moved. The destinationChild is the row to which the rows will be moved. That is, the index at row sourceFirst in sourceParent will become row destinationChild in destinationParent , followed by all other rows up to sourceLast .

However, when moving rows down in the same parent ( sourceParent and destinationParent are equal), the rows will be placed before the destinationChild index. That is, if you wish to move rows 0 and 1 so they will become rows 1 and 2, destinationChild should be 3. In this case, the new index for the source row i (which is between sourceFirst and sourceLast ) is equal to (destinationChild-sourceLast-1+i) .

注意，若 sourceParent and destinationParent are the same, you must ensure that the destinationChild is not within the range of sourceFirst and sourceLast + 1. You must also ensure that you do not attempt to move a row to one of its own children or ancestors. This method returns false if either condition is true, in which case you should abort your move operation.

	Specify the first and last row numbers for the span of rows in the source parent you want to move in the model. Also specify the row in the destination parent to move the span to. For example, as shown in the diagram, we move three rows from row 2 to 4 in the source, so sourceFirst is 2 and sourceLast is 4. We move those items to above row 2 in the destination, so destinationChild is 2. beginMoveRows(sourceParent, 2, 4, destinationParent, 2); This moves the three rows rows 2, 3, and 4 in the source to become 2, 3 and 4 in the destination. Other affected siblings are displaced accordingly.
	To append rows to another parent, move them to after the last row. For example, as shown in the diagram, we move three rows to a collection of 6 existing rows (ending in row 5), so destinationChild is 6: beginMoveRows(sourceParent, 2, 4, destinationParent, 6); This moves the target rows to the end of the target parent as 6, 7 and 8.
	To move rows within the same parent, specify the row to move them to. For example, as shown in the diagram, we move one item from row 2 to row 0, so sourceFirst and sourceLast are 2 and destinationChild 为 0。 beginMoveRows(parent, 2, 2, parent, 0); Note that other rows may be displaced accordingly. Note also that when moving items within the same parent you should not attempt invalid or no-op moves. In the above example, item 2 is at row 2 before the move, so it can not be moved to row 2 (where it is already) or row 3 (no-op as row 3 means above row 3, where it is already)
	To move rows within the same parent, specify the row to move them to. For example, as shown in the diagram, we move one item from row 2 to row 4, so sourceFirst and sourceLast are 2 and destinationChild is 4. beginMoveRows(parent, 2, 2, parent, 4); Note that other rows may be displaced accordingly.

该函数在 Qt 4.6 引入。

另请参阅 endMoveRows ().

[protected] void QAbstractItemModel:: beginRemoveColumns (const QModelIndex & parent , int first , int last )

开始列移除操作。

When reimplementing removeColumns () in a subclass, you must call this function before removing data from the model's underlying data store.

parent index corresponds to the parent from which the new columns are removed; first and last are the column numbers of the first and last columns to be removed.

Specify the first and last column numbers for the span of columns you want to remove from an item in a model. For example, as shown in the diagram, we remove the three columns from column 4 to column 6, so first is 4 and last is 6: beginRemoveColumns(parent, 4, 6);

注意： 此函数发射 columnsAboutToBeRemoved () signal which connected views (or proxies) must handle before the data is removed. Otherwise, the views may end up in an invalid state.

另请参阅 endRemoveColumns ().

[protected] void QAbstractItemModel:: beginRemoveRows (const QModelIndex & parent , int first , int last )

Begins a row removal operation.

When reimplementing removeRows () in a subclass, you must call this function before removing data from the model's underlying data store.

parent index corresponds to the parent from which the new rows are removed; first and last are the row numbers of the rows to be removed.

Specify the first and last row numbers for the span of rows you want to remove from an item in a model. For example, as shown in the diagram, we remove the two rows from row 2 to row 3, so first is 2 and last is 3: beginRemoveRows(parent, 2, 3);

注意： 此函数发射 rowsAboutToBeRemoved () signal which connected views (or proxies) must handle before the data is removed. Otherwise, the views may end up in an invalid state.

另请参阅 endRemoveRows ().

[protected] void QAbstractItemModel:: beginResetModel ()

Begins a model reset operation.

A reset operation resets the model to its current state in any attached views.

注意： Any views attached to this model will be reset as well.

When a model is reset it means that any previous data reported from the model is now invalid and has to be queried for again. This also means that the current item and any selected items will become invalid.

When a model radically changes its data it can sometimes be easier to just call this function rather than emit dataChanged () to inform other components when the underlying data source, or its structure, has changed.

You must call this function before resetting any internal data structures in your model or proxy model.

This function emits the signal modelAboutToBeReset ().

该函数在 Qt 4.6 引入。

另请参阅 modelAboutToBeReset (), modelReset ()，和 endResetModel ().

[virtual] QModelIndex QAbstractItemModel:: buddy (const QModelIndex & index ) const

Returns a model index for the buddy of the item represented by index . When the user wants to edit an item, the view will call this function to check whether another item in the model should be edited instead. Then, the view will construct a delegate using the model index returned by the buddy item.

The default implementation of this function has each item as its own buddy.

[virtual] bool QAbstractItemModel:: canDropMimeData (const QMimeData * data , Qt::DropAction action , int row , int column , const QModelIndex & parent ) const

返回 true if a model can accept a drop of the data . This default implementation only checks if data has at least one format in the list of mimeTypes () and if action is among the model's supportedDropActions ().

Reimplement this function in your custom model, if you want to test whether the data can be dropped at row , column , parent with action . If you don't need that test, it is not necessary to reimplement this function.

另请参阅 dropMimeData () 和 将拖放用于项视图 .

[virtual] bool QAbstractItemModel:: canFetchMore (const QModelIndex & parent ) const

返回 true if there is more data available for parent ；否则返回 false .

The default implementation always returns false .

If canFetchMore() returns true ， fetchMore () function should be called. This is the behavior of QAbstractItemView ，例如。

另请参阅 fetchMore ().

[protected] void QAbstractItemModel:: changePersistentIndex (const QModelIndex & from , const QModelIndex & to )

改变 QPersistentModelIndex that is equal to the given from model index to the given to model index.

If no persistent model index equal to the given from model index was found, nothing is changed.

另请参阅 persistentIndexList () 和 changePersistentIndexList ().

[protected] void QAbstractItemModel:: changePersistentIndexList (const QModelIndexList & from , const QModelIndexList & to )

Changes the { QPersistentModelIndex }es that are equal to the indexes in the given from model index list to the given to model index list.

If no persistent model indexes equal to the indexes in the given from model index list are found, nothing is changed.

该函数在 Qt 4.1 引入。

另请参阅 persistentIndexList () 和 changePersistentIndex ().

[pure virtual] int QAbstractItemModel:: columnCount (const QModelIndex & parent = QModelIndex()) const

Returns the number of columns for the children of the given parent .

In most subclasses, the number of columns is independent of the parent .

例如：

int DomModel::columnCount(const QModelIndex &/*parent*/) const
{
    return 3;
}
					

注意： When implementing a table based model, columnCount() should return 0 when the parent is valid.

另请参阅 rowCount ().

[signal] void QAbstractItemModel:: columnsAboutToBeInserted (const QModelIndex & parent , int first , int last )

This signal is emitted just before columns are inserted into the model. The new items will be positioned between first and last inclusive, under the given parent 项。

注意： Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

注意： 这是私有信号。它可以用于信号连接，但不能由用户发射。

另请参阅 insertColumns () 和 beginInsertColumns ().

[signal] void QAbstractItemModel:: columnsAboutToBeMoved (const QModelIndex & sourceParent , int sourceStart , int sourceEnd , const QModelIndex & destinationParent , int destinationColumn )

This signal is emitted just before columns are moved within the model. The items that will be moved are those between sourceStart and sourceEnd inclusive, under the given sourceParent item. They will be moved to destinationParent starting at the column destinationColumn .

注意： Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

该函数在 Qt 4.6 引入。

注意： 这是私有信号。它可以用于信号连接，但不能由用户发射。

另请参阅 beginMoveRows ().

[signal] void QAbstractItemModel:: columnsAboutToBeRemoved (const QModelIndex & parent , int first , int last )

This signal is emitted just before columns are removed from the model. The items to be removed are those between first and last inclusive, under the given parent 项。

注意： Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

注意： 这是私有信号。它可以用于信号连接，但不能由用户发射。

另请参阅 removeColumns () 和 beginRemoveColumns ().

[signal] void QAbstractItemModel:: columnsInserted (const QModelIndex & parent , int first , int last )

This signal is emitted after columns have been inserted into the model. The new items are those between first and last inclusive, under the given parent 项。

注意： Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

注意： 这是私有信号。它可以用于信号连接，但不能由用户发射。

另请参阅 insertColumns () 和 beginInsertColumns ().

[signal] void QAbstractItemModel:: columnsMoved (const QModelIndex & parent , int start , int end , const QModelIndex & destination , int column )

This signal is emitted after columns have been moved within the model. The items between start and end inclusive, under the given parent item have been moved to destination starting at the column column .

注意： Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

该函数在 Qt 4.6 引入。

注意： 这是私有信号。它可以用于信号连接，但不能由用户发射。

另请参阅 beginMoveRows ().

[signal] void QAbstractItemModel:: columnsRemoved (const QModelIndex & parent , int first , int last )

This signal is emitted after columns have been removed from the model. The removed items are those between first and last inclusive, under the given parent 项。

注意： Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

注意： 这是私有信号。它可以用于信号连接，但不能由用户发射。

另请参阅 removeColumns () 和 beginRemoveColumns ().

[protected] QModelIndex QAbstractItemModel:: createIndex ( int row , int column , void * ptr = Q_NULLPTR) const

Creates a model index for the given row and column with the internal pointer ptr .

当使用 QSortFilterProxyModel , its indexes have their own internal pointer. It is not advisable to access this internal pointer outside of the model. Use the data () 函数代替。

This function provides a consistent interface that model subclasses must use to create model indexes.

[protected] QModelIndex QAbstractItemModel:: createIndex ( int row , int column , quintptr id ) const

Creates a model index for the given row and column with the internal identifier, id .

This function provides a consistent interface that model subclasses must use to create model indexes.

另请参阅 QModelIndex::internalId ().

[pure virtual] QVariant QAbstractItemModel:: data (const QModelIndex & index , int role = Qt::DisplayRole) const

Returns the data stored under the given role for the item referred to by the index .

注意： If you do not have a value to return, return an invalid QVariant instead of returning 0.

另请参阅 Qt::ItemDataRole , setData ()，和 headerData ().

[signal] void QAbstractItemModel:: dataChanged (const QModelIndex & topLeft , const QModelIndex & bottomRight , const QVector < int > & roles = QVector<int> ())

This signal is emitted whenever the data in an existing item changes.

If the items are of the same parent, the affected ones are those between topLeft and bottomRight inclusive. If the items do not have the same parent, the behavior is undefined.

当重实现 setData () 函数，必须明确发射此信号。

可选 roles argument can be used to specify which data roles have actually been modified. An empty vector in the roles argument means that all roles should be considered modified. The order of elements in the roles argument does not have any relevance.

另请参阅 headerDataChanged (), setData ()，和 layoutChanged ().

[virtual] bool QAbstractItemModel:: dropMimeData (const QMimeData * data , Qt::DropAction action , int row , int column , const QModelIndex & parent )

处理 data 提供通过拖放操作结束按给定 action .

返回 true if the data and action were handled by the model; otherwise returns false .

指定 row , column and parent indicate the location of an item in the model where the operation ended. It is the responsibility of the model to complete the action at the correct location.

For instance, a drop action on an item in a QTreeView can result in new items either being inserted as children of the item specified by row , column ，和 parent , or as siblings of the item.

当 row and column are -1 it means that the dropped data should be considered as dropped directly on parent . Usually this will mean appending the data as child items of parent 。若 row and column are greater than or equal zero, it means that the drop occurred just before the specified row and column 以指定 parent .

mimeTypes () member is called to get the list of acceptable MIME types. This default implementation assumes the default implementation of mimeTypes (), which returns a single default MIME type. If you reimplement mimeTypes () in your custom model to return multiple MIME types, you must reimplement this function to make use of them.

另请参阅 supportedDropActions (), canDropMimeData ()，和 将拖放用于项视图 .

[protected] void QAbstractItemModel:: endInsertColumns ()

Ends a column insertion operation.

When reimplementing insertColumns () in a subclass, you must call this function after inserting data into the model's underlying data store.

另请参阅 beginInsertColumns ().

[protected] void QAbstractItemModel:: endInsertRows ()

Ends a row insertion operation.

When reimplementing insertRows () in a subclass, you must call this function after inserting data into the model's underlying data store.

另请参阅 beginInsertRows ().

[protected] void QAbstractItemModel:: endMoveColumns ()

Ends a column move operation.

When implementing a subclass, you must call this function after moving data within the model's underlying data store.

该函数在 Qt 4.6 引入。

另请参阅 beginMoveColumns ().

[protected] void QAbstractItemModel:: endMoveRows ()

Ends a row move operation.

When implementing a subclass, you must call this function after moving data within the model's underlying data store.

该函数在 Qt 4.6 引入。

另请参阅 beginMoveRows ().

[protected] void QAbstractItemModel:: endRemoveColumns ()

Ends a column removal operation.

When reimplementing removeColumns () in a subclass, you must call this function after removing data from the model's underlying data store.

另请参阅 beginRemoveColumns ().

[protected] void QAbstractItemModel:: endRemoveRows ()

Ends a row removal operation.

When reimplementing removeRows () in a subclass, you must call this function after removing data from the model's underlying data store.

另请参阅 beginRemoveRows ().

[protected] void QAbstractItemModel:: endResetModel ()

Completes a model reset operation.

You must call this function after resetting any internal data structure in your model or proxy model.

This function emits the signal modelReset ().

该函数在 Qt 4.6 引入。

另请参阅 beginResetModel ().

[virtual] void QAbstractItemModel:: fetchMore (const QModelIndex & parent )

Fetches any available data for the items with the parent specified by the parent index.

Reimplement this if you are populating your model incrementally.

默认实现什么都不做。

另请参阅 canFetchMore ().

[virtual] Qt::ItemFlags QAbstractItemModel:: flags (const QModelIndex & index ) const

Returns the item flags for the given index .

The base class implementation returns a combination of flags that enables the item ( ItemIsEnabled ) and allows it to be selected ( ItemIsSelectable ).

另请参阅 Qt::ItemFlags .

[virtual] bool QAbstractItemModel:: hasChildren (const QModelIndex & parent = QModelIndex()) const

返回 true if parent has any children; otherwise returns false .

使用 rowCount () on the parent to find out the number of children.

Note that it is undefined behavior to report that a particular index hasChildren with this method if the same index has the flag Qt::ItemNeverHasChildren set.

另请参阅 parent () 和 index ().

bool QAbstractItemModel:: hasIndex ( int row , int column , const QModelIndex & parent = QModelIndex()) const

返回 true if the model returns a valid QModelIndex for row and column with parent ，否则返回 false .

[virtual] QVariant QAbstractItemModel:: headerData ( int section , Qt::Orientation orientation , int role = Qt::DisplayRole) const

返回数据为给定 role and section in the header with the specified orientation .

For horizontal headers, the section number corresponds to the column number. Similarly, for vertical headers, the section number corresponds to the row number.

另请参阅 Qt::ItemDataRole , setHeaderData ()，和 QHeaderView .

[signal] void QAbstractItemModel:: headerDataChanged ( Qt::Orientation orientation , int first , int last )

This signal is emitted whenever a header is changed. The orientation indicates whether the horizontal or vertical header has changed. The sections in the header from the first 到 last need to be updated.

当重实现 setHeaderData () 函数，必须明确发射此信号。

If you are changing the number of columns or rows you do not need to emit this signal, but use the begin/end functions (refer to the section on subclassing in the QAbstractItemModel 类描述了解细节)。

另请参阅 headerData (), setHeaderData ()，和 dataChanged ().

[pure virtual] QModelIndex QAbstractItemModel:: index ( int row , int column , const QModelIndex & parent = QModelIndex()) const

返回模型中的项索引，指定通过给定 row , column and parent index.

当在子类中重实现此函数时，调用 createIndex () 去生成模型索引，其它组件可以使用以引用模型中的项。

另请参阅 createIndex ().

bool QAbstractItemModel:: insertColumn ( int column , const QModelIndex & parent = QModelIndex())

Inserts a single column before the given column in the child items of the parent 指定。

返回 true if the column is inserted; otherwise returns false .

另请参阅 insertColumns (), insertRow ()，和 removeColumn ().

[virtual] bool QAbstractItemModel:: insertColumns ( int column , int count , const QModelIndex & parent = QModelIndex())

On models that support this, inserts count new columns into the model before the given column . The items in each new column will be children of the item represented by the parent model index.

若 column is 0, the columns are prepended to any existing columns.

若 column is columnCount (), the columns are appended to any existing columns.

若 parent has no children, a single row with count columns is inserted.

返回 true if the columns were successfully inserted; otherwise returns false .

The base class implementation does nothing and returns false .

If you implement your own model, you can reimplement this function if you want to support insertions. Alternatively, you can provide your own API for altering the data.

另请参阅 insertRows (), removeColumns (), beginInsertColumns ()，和 endInsertColumns ().

bool QAbstractItemModel:: insertRow ( int row , const QModelIndex & parent = QModelIndex())

Inserts a single row before the given row in the child items of the parent 指定。

注意： This function calls the virtual method insertRows .

返回 true if the row is inserted; otherwise returns false .

另请参阅 insertRows (), insertColumn ()，和 removeRow ().

[virtual] bool QAbstractItemModel:: insertRows ( int row , int count , const QModelIndex & parent = QModelIndex())

注意： The base class implementation of this function does nothing and returns false .

On models that support this, inserts count rows into the model before the given row . Items in the new row will be children of the item represented by the parent model index.

若 row is 0, the rows are prepended to any existing rows in the parent.

若 row is rowCount (), the rows are appended to any existing rows in the parent.

若 parent has no children, a single column with count rows is inserted.

返回 true if the rows were successfully inserted; otherwise returns false .

If you implement your own model, you can reimplement this function if you want to support insertions. Alternatively, you can provide your own API for altering the data. In either case, you will need to call beginInsertRows () 和 endInsertRows () to notify other components that the model has changed.

另请参阅 insertColumns (), removeRows (), beginInsertRows ()，和 endInsertRows ().

[virtual] QMap < int , QVariant > QAbstractItemModel:: itemData (const QModelIndex & index ) const

Returns a map with values for all predefined roles in the model for the item at the given index .

Reimplement this function if you want to extend the default behavior of this function to include custom roles in the map.

另请参阅 setItemData (), Qt::ItemDataRole ，和 data ().

[signal] void QAbstractItemModel:: layoutAboutToBeChanged (const QList < QPersistentModelIndex > & parents = QList<QPersistentModelIndex> (), QAbstractItemModel::LayoutChangeHint hint = QAbstractItemModel::NoLayoutChangeHint)

This signal is emitted just before the layout of a model is changed. Components connected to this signal use it to adapt to changes in the model's layout.

Subclasses should update any persistent model indexes after emitting layoutAboutToBeChanged().

可选 parents parameter is used to give a more specific notification about what parts of the layout of the model are changing. An empty list indicates a change to the layout of the entire model. The order of elements in the parents list is not significant. The optional hint parameter is used to give a hint about what is happening while the model is relayouting.

该函数在 Qt 5.0 引入。

另请参阅 layoutChanged () 和 changePersistentIndex ().

[signal] void QAbstractItemModel:: layoutChanged (const QList < QPersistentModelIndex > & parents = QList<QPersistentModelIndex> (), QAbstractItemModel::LayoutChangeHint hint = QAbstractItemModel::NoLayoutChangeHint)

This signal is emitted whenever the layout of items exposed by the model has changed; for example, when the model has been sorted. When this signal is received by a view, it should update the layout of items to reflect this change.

当子类化 QAbstractItemModel or QAbstractProxyModel , ensure that you emit layoutAboutToBeChanged () before changing the order of items or altering the structure of the data you expose to views, and emit layoutChanged() after changing the layout.

可选 parents parameter is used to give a more specific notification about what parts of the layout of the model are changing. An empty list indicates a change to the layout of the entire model. The order of elements in the parents list is not significant. The optional hint parameter is used to give a hint about what is happening while the model is relayouting.

Subclasses should update any persistent model indexes before emitting layoutChanged(). In other words, when the structure changes:

• emit layoutAboutToBeChanged
• Remember the QModelIndex that will change
• Update your internal data
• 调用 changePersistentIndex ()
• emit layoutChanged

该函数在 Qt 5.0 引入。

另请参阅 layoutAboutToBeChanged (), dataChanged (), headerDataChanged (), modelReset ()，和 changePersistentIndex ().

[virtual] QModelIndexList QAbstractItemModel:: match (const QModelIndex & start , int role , const QVariant & value , int hits = 1, Qt::MatchFlags flags = Qt::MatchFlags( Qt::MatchStartsWith | Qt::MatchWrap )) const

Returns a list of indexes for the items in the column of the start index where data stored under the given role matches the specified value . The way the search is performed is defined by the flags given. The list that is returned may be empty. Note also that the order of results in the list may not correspond to the order in the model, if for example a proxy model is used. The order of the results can not be relied upon.

The search begins from the start index, and continues until the number of matching data items equals hits , the search reaches the last row, or the search reaches start again - depending on whether MatchWrap 指定在 flags . If you want to search for all matching items, use hits = -1.

By default, this function will perform a wrapping, string-based comparison on all items, searching for items that begin with the search term specified by value .

注意： The default implementation of this function only searches columns. Reimplement this function to include a different search behavior.

[virtual] QMimeData *QAbstractItemModel:: mimeData (const QModelIndexList & indexes ) const

Returns an object that contains serialized items of data corresponding to the list of indexes specified. The format used to describe the encoded data is obtained from the mimeTypes () function. This default implementation uses the default MIME type returned by the default implementation of mimeTypes (). If you reimplement mimeTypes () in your custom model to return more MIME types, reimplement this function to make use of them.

If the list of indexes is empty, or there are no supported MIME types, 0 is returned rather than a serialized empty list.

另请参阅 mimeTypes () 和 dropMimeData ().

[virtual] QStringList QAbstractItemModel:: mimeTypes () const

Returns the list of allowed MIME types. By default, the built-in models and views use an internal MIME type: application/x-qabstractitemmodeldatalist .

When implementing drag and drop support in a custom model, if you will return data in formats other than the default internal MIME type, reimplement this function to return your list of MIME types.

If you reimplement this function in your custom model, you must also reimplement the member functions that call it: mimeData () 和 dropMimeData ().

另请参阅 mimeData () 和 dropMimeData ().

[signal] void QAbstractItemModel:: modelAboutToBeReset ()

此信号被发射当 beginResetModel () is called, before the model's internal state (e.g. persistent model indexes) has been invalidated.

该函数在 Qt 4.2 引入。

注意： 这是私有信号。它可以用于信号连接，但不能由用户发射。

另请参阅 beginResetModel () 和 modelReset ().

[signal] void QAbstractItemModel:: modelReset ()

此信号被发射当 endResetModel () is called, after the model's internal state (e.g. persistent model indexes) has been invalidated.

Note that if a model is reset it should be considered that all information previously retrieved from it is invalid. This includes but is not limited to the rowCount () 和 columnCount (), flags (), data retrieved through data ()，和 roleNames ().

该函数在 Qt 4.1 引入。

注意： 这是私有信号。它可以用于信号连接，但不能由用户发射。

另请参阅 endResetModel () 和 modelAboutToBeReset ().

bool QAbstractItemModel:: moveColumn (const QModelIndex & sourceParent , int sourceColumn , const QModelIndex & destinationParent , int destinationChild )

On models that support this, moves sourceColumn from sourceParent to destinationChild under destinationParent .

返回 true if the columns were successfully moved; otherwise returns false .

另请参阅 moveColumns () 和 moveRow ().

[virtual] bool QAbstractItemModel:: moveColumns (const QModelIndex & sourceParent , int sourceColumn , int count , const QModelIndex & destinationParent , int destinationChild )

On models that support this, moves count columns starting with the given sourceColumn under parent sourceParent to column destinationChild under parent destinationParent .

返回 true if the columns were successfully moved; otherwise returns false .

The base class implementation does nothing and returns false .

If you implement your own model, you can reimplement this function if you want to support moving. Alternatively, you can provide your own API for altering the data.

另请参阅 beginMoveColumns () 和 endMoveColumns ().

bool QAbstractItemModel:: moveRow (const QModelIndex & sourceParent , int sourceRow , const QModelIndex & destinationParent , int destinationChild )

On models that support this, moves sourceRow from sourceParent to destinationChild under destinationParent .

返回 true if the rows were successfully moved; otherwise returns false .

另请参阅 moveRows () 和 moveColumn ().

[virtual] bool QAbstractItemModel:: moveRows (const QModelIndex & sourceParent , int sourceRow , int count , const QModelIndex & destinationParent , int destinationChild )

On models that support this, moves count rows starting with the given sourceRow under parent sourceParent to row destinationChild under parent destinationParent .

返回 true if the rows were successfully moved; otherwise returns false .

The base class implementation does nothing and returns false .

If you implement your own model, you can reimplement this function if you want to support moving. Alternatively, you can provide your own API for altering the data.

另请参阅 beginMoveRows () 和 endMoveRows ().

[pure virtual] QModelIndex QAbstractItemModel:: parent (const QModelIndex & index ) const

Returns the parent of the model item with the given index . If the item has no parent, an invalid QModelIndex 被返回。

A common convention used in models that expose tree data structures is that only items in the first column have children. For that case, when reimplementing this function in a subclass the column of the returned QModelIndex would be 0.

When reimplementing this function in a subclass, be careful to avoid calling QModelIndex member functions, such as QModelIndex::parent (), since indexes belonging to your model will simply call your implementation, leading to infinite recursion.

另请参阅 createIndex ().

[protected] QModelIndexList QAbstractItemModel:: persistentIndexList () const

Returns the list of indexes stored as persistent indexes in the model.

该函数在 Qt 4.2 引入。

bool QAbstractItemModel:: removeColumn ( int column , const QModelIndex & parent = QModelIndex())

移除给定 column from the child items of the parent 指定。

返回 true if the column is removed; otherwise returns false .

另请参阅 removeColumns (), removeRow ()，和 insertColumn ().

[virtual] bool QAbstractItemModel:: removeColumns ( int column , int count , const QModelIndex & parent = QModelIndex())

On models that support this, removes count columns starting with the given column under parent parent from the model.

返回 true if the columns were successfully removed; otherwise returns false .

The base class implementation does nothing and returns false .

If you implement your own model, you can reimplement this function if you want to support removing. Alternatively, you can provide your own API for altering the data.

另请参阅 removeColumn (), removeRows (), insertColumns (), beginRemoveColumns ()，和 endRemoveColumns ().

bool QAbstractItemModel:: removeRow ( int row , const QModelIndex & parent = QModelIndex())

移除给定 row from the child items of the parent 指定。

返回 true if the row is removed; otherwise returns false .

This is a convenience function that calls removeRows ()。 QAbstractItemModel implementation of removeRows () 什么都不做。

另请参阅 removeRows (), removeColumn ()，和 insertRow ().

[virtual] bool QAbstractItemModel:: removeRows ( int row , int count , const QModelIndex & parent = QModelIndex())

On models that support this, removes count rows starting with the given row under parent parent from the model.

返回 true if the rows were successfully removed; otherwise returns false .

The base class implementation does nothing and returns false .

If you implement your own model, you can reimplement this function if you want to support removing. Alternatively, you can provide your own API for altering the data.

另请参阅 removeRow (), removeColumns (), insertColumns (), beginRemoveRows ()，和 endRemoveRows ().

[protected slot] void QAbstractItemModel:: resetInternalData ()

This slot is called just after the internal data of a model is cleared while it is being reset.

This slot is provided the convenience of subclasses of concrete proxy models, such as subclasses of QSortFilterProxyModel which maintain extra data.

class CustomDataProxy : public QSortFilterProxyModel
{
    Q_OBJECT
public:
    CustomDataProxy(QObject *parent)
      : QSortFilterProxyModel(parent)
    {
    }
    ...
    QVariant data(const QModelIndex &index, int role)
    {
        if (role != Qt::BackgroundRole)
            return QSortFilterProxyModel::data(index, role);
        if (m_customData.contains(index.row()))
            return m_customData.value(index.row());
        return QSortFilterProxyModel::data(index, role);
    }
private slots:
    void resetInternalData()
    {
        m_customData.clear();
    }
private:
  QHash<int, QVariant> m_customData;
};
					

注意： Due to a mistake, this slot is missing in Qt 5.0.

该函数在 Qt 4.8 引入。

另请参阅 modelAboutToBeReset () 和 modelReset ().

[virtual slot] void QAbstractItemModel:: revert ()

Lets the model know that it should discard cached information. This function is typically used for row editing.

另请参阅 submit ().

[virtual] QHash < int , QByteArray > QAbstractItemModel:: roleNames () const

Returns the model's role names.

The default role names set by Qt are:

Qt Role	QML Role Name
Qt::DisplayRole	display
Qt::DecorationRole	decoration
Qt::EditRole	edit
Qt::ToolTipRole	toolTip
Qt::StatusTipRole	statusTip
Qt::WhatsThisRole	whatsThis

该函数在 Qt 4.6 引入。

另请参阅 setRoleNames ().

[pure virtual] int QAbstractItemModel:: rowCount (const QModelIndex & parent = QModelIndex()) const

Returns the number of rows under the given parent . When the parent is valid it means that rowCount is returning the number of children of parent.

注意： When implementing a table based model, rowCount() should return 0 when the parent is valid.

另请参阅 columnCount ().

[signal] void QAbstractItemModel:: rowsAboutToBeInserted (const QModelIndex & parent , int start , int end )

This signal is emitted just before rows are inserted into the model. The new items will be positioned between start and end inclusive, under the given parent 项。

注意： Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

注意： 这是私有信号。它可以用于信号连接，但不能由用户发射。

另请参阅 insertRows () 和 beginInsertRows ().

[signal] void QAbstractItemModel:: rowsAboutToBeMoved (const QModelIndex & sourceParent , int sourceStart , int sourceEnd , const QModelIndex & destinationParent , int destinationRow )

This signal is emitted just before rows are moved within the model. The items that will be moved are those between sourceStart and sourceEnd inclusive, under the given sourceParent item. They will be moved to destinationParent starting at the row destinationRow .

注意： Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

该函数在 Qt 4.6 引入。

注意： 这是私有信号。它可以用于信号连接，但不能由用户发射。

另请参阅 beginMoveRows ().

[signal] void QAbstractItemModel:: rowsAboutToBeRemoved (const QModelIndex & parent , int first , int last )

This signal is emitted just before rows are removed from the model. The items that will be removed are those between first and last inclusive, under the given parent 项。

注意： Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

注意： 这是私有信号。它可以用于信号连接，但不能由用户发射。

另请参阅 removeRows () 和 beginRemoveRows ().

[signal] void QAbstractItemModel:: rowsInserted (const QModelIndex & parent , int first , int last )

This signal is emitted after rows have been inserted into the model. The new items are those between first and last inclusive, under the given parent 项。

注意： Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

注意： 这是私有信号。它可以用于信号连接，但不能由用户发射。

另请参阅 insertRows () 和 beginInsertRows ().

[signal] void QAbstractItemModel:: rowsMoved (const QModelIndex & parent , int start , int end , const QModelIndex & destination , int row )

This signal is emitted after rows have been moved within the model. The items between start and end inclusive, under the given parent item have been moved to destination starting at the row row .

注意： Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

该函数在 Qt 4.6 引入。

注意： 这是私有信号。它可以用于信号连接，但不能由用户发射。

另请参阅 beginMoveRows ().

[signal] void QAbstractItemModel:: rowsRemoved (const QModelIndex & parent , int first , int last )

This signal is emitted after rows have been removed from the model. The removed items are those between first and last inclusive, under the given parent 项。

注意： Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

注意： 这是私有信号。它可以用于信号连接，但不能由用户发射。

另请参阅 removeRows () 和 beginRemoveRows ().

[virtual] bool QAbstractItemModel:: setData (const QModelIndex & index , const QVariant & value , int role = Qt::EditRole)

设置 role data for the item at index to value .

返回 true 若成功；否则返回 false .

dataChanged () signal should be emitted if the data was successfully set.

The base class implementation returns false . This function and data () must be reimplemented for editable models.

另请参阅 Qt::ItemDataRole , data ()，和 itemData ().

[virtual] bool QAbstractItemModel:: setHeaderData ( int section , Qt::Orientation orientation , const QVariant & value , int role = Qt::EditRole)

Sets the data for the given role and section in the header with the specified orientation 到 value 供给。

返回 true if the header's data was updated; otherwise returns false .

When reimplementing this function, the headerDataChanged () signal must be emitted explicitly.

另请参阅 Qt::ItemDataRole and headerData ().

[virtual] bool QAbstractItemModel:: setItemData (const QModelIndex & index , const QMap < int , QVariant > & roles )

Sets the role data for the item at index to the associated value in roles , for every Qt::ItemDataRole .

返回 true 若成功；否则返回 false .

Roles that are not in roles will not be modified.

另请参阅 setData (), data ()，和 itemData ().

[virtual] QModelIndex QAbstractItemModel:: sibling ( int row , int column , const QModelIndex & index ) const

Returns the sibling at row and column for the item at index ，或无效 QModelIndex if there is no sibling at that location.

sibling() is just a convenience function that finds the item's parent, and uses it to retrieve the index of the child item in the specified row and column .

This method can optionally be overridden for implementation-specific optimization.

另请参阅 index (), QModelIndex::row ()，和 QModelIndex::column ().

[virtual] void QAbstractItemModel:: sort ( int column , Qt::SortOrder order = Qt::AscendingOrder)

Sorts the model by column 以给定 order .

基类实现什么都不做。

[virtual] QSize QAbstractItemModel:: span (const QModelIndex & index ) const

Returns the row and column span of the item represented by index .

注意： Currently, span is not used.

[virtual slot] bool QAbstractItemModel:: submit ()

Lets the model know that it should submit cached information to permanent storage. This function is typically used for row editing.

返回 true 若没有错误；否则返回 false .

另请参阅 revert ().

[virtual] Qt::DropActions QAbstractItemModel:: supportedDragActions () const

Returns the actions supported by the data in this model.

默认实现返回 supportedDropActions (). Reimplement this function if you wish to support additional actions.

supportedDragActions() is used by QAbstractItemView::startDrag () as the default values when a drag occurs.

另请参阅 setSupportedDragActions (), Qt::DropActions ，和 将拖放用于项视图 .

[virtual] Qt::DropActions QAbstractItemModel:: supportedDropActions () const

Returns the drop actions supported by this model.

默认实现返回 Qt::CopyAction . Reimplement this function if you wish to support additional actions. You must also reimplement the dropMimeData () function to handle the additional operations.

该函数在 Qt 4.2 引入。

另请参阅 dropMimeData (), Qt::DropActions ，和 将拖放用于项视图 .