内容

• 公共类型
• 特性
• 公共函数
• 信号
• 详细描述

QItemModelSurfaceDataProxy Class

Proxy class for presenting data in item models with Q3DSurface . 更多...

头：	#include <QItemModelSurfaceDataProxy>
Since:	QtDataVisualization 1.0
实例化：	ItemModelSurfaceDataProxy
继承：	QSurfaceDataProxy

• 所有成员列表，包括继承成员

公共类型

enum	MultiMatchBehavior { MMBFirst, MMBLast, MMBAverage, MMBCumulativeY }

特性

autoColumnCategories : bool autoRowCategories : bool columnCategories : QStringList columnRole : QString columnRolePattern : QRegExp columnRoleReplace : QString itemModel : QAbstractItemModel * multiMatchBehavior : MultiMatchBehavior rowCategories : QStringList rowRole : QString rowRolePattern : QRegExp

rowRoleReplace : QString useModelCategories : bool xPosRole : QString xPosRolePattern : QRegExp xPosRoleReplace : QString yPosRole : QString yPosRolePattern : QRegExp yPosRoleReplace : QString zPosRole : QString zPosRolePattern : QRegExp zPosRoleReplace : QString

• 3 特性继承自 QSurfaceDataProxy
• 1 特性继承自 QAbstractDataProxy
• 1 特性继承自 QObject

公共函数

	QItemModelSurfaceDataProxy (QObject * parent = Q_NULLPTR)
	QItemModelSurfaceDataProxy (QAbstractItemModel * itemModel , QObject * parent = Q_NULLPTR)
	QItemModelSurfaceDataProxy (QAbstractItemModel * itemModel , const QString & yPosRole , QObject * parent = Q_NULLPTR)
	QItemModelSurfaceDataProxy (QAbstractItemModel * itemModel , const QString & rowRole , const QString & columnRole , const QString & yPosRole , QObject * parent = Q_NULLPTR)
	QItemModelSurfaceDataProxy (QAbstractItemModel * itemModel , const QString & rowRole , const QString & columnRole , const QString & xPosRole , const QString & yPosRole , const QString & zPosRole , QObject * parent = Q_NULLPTR)
	QItemModelSurfaceDataProxy (QAbstractItemModel * itemModel , const QString & rowRole , const QString & columnRole , const QString & yPosRole , const QStringList & rowCategories , const QStringList & columnCategories , QObject * parent = Q_NULLPTR)
	QItemModelSurfaceDataProxy (QAbstractItemModel * itemModel , const QString & rowRole , const QString & columnRole , const QString & xPosRole , const QString & yPosRole , const QString & zPosRole , const QStringList & rowCategories , const QStringList & columnCategories , QObject * parent = Q_NULLPTR)
virtual	~QItemModelSurfaceDataProxy ()
bool	autoColumnCategories () const
bool	autoRowCategories () const
QStringList	columnCategories () const
int	columnCategoryIndex (const QString & category )
QString	columnRole () const
QRegExp	columnRolePattern () const
QString	columnRoleReplace () const
QAbstractItemModel *	itemModel () const
MultiMatchBehavior	multiMatchBehavior () const
void	remap (const QString & rowRole , const QString & columnRole , const QString & xPosRole , const QString & yPosRole , const QString & zPosRole , const QStringList & rowCategories , const QStringList & columnCategories )
QStringList	rowCategories () const
int	rowCategoryIndex (const QString & category )
QString	rowRole () const
QRegExp	rowRolePattern () const
QString	rowRoleReplace () const
void	setAutoColumnCategories (bool enable )
void	setAutoRowCategories (bool enable )
void	setColumnCategories (const QStringList & categories )
void	setColumnRole (const QString & role )
void	setColumnRolePattern (const QRegExp & pattern )
void	setColumnRoleReplace (const QString & replace )
void	setItemModel (QAbstractItemModel * itemModel )
void	setMultiMatchBehavior (MultiMatchBehavior behavior )
void	setRowCategories (const QStringList & categories )
void	setRowRole (const QString & role )
void	setRowRolePattern (const QRegExp & pattern )
void	setRowRoleReplace (const QString & replace )
void	setUseModelCategories (bool enable )
void	setXPosRole (const QString & role )
void	setXPosRolePattern (const QRegExp & pattern )
void	setXPosRoleReplace (const QString & replace )
void	setYPosRole (const QString & role )
void	setYPosRolePattern (const QRegExp & pattern )
void	setYPosRoleReplace (const QString & replace )
void	setZPosRole (const QString & role )
void	setZPosRolePattern (const QRegExp & pattern )
void	setZPosRoleReplace (const QString & replace )
bool	useModelCategories () const
QString	xPosRole () const
QRegExp	xPosRolePattern () const
QString	xPosRoleReplace () const
QString	yPosRole () const
QRegExp	yPosRolePattern () const
QString	yPosRoleReplace () const
QString	zPosRole () const
QRegExp	zPosRolePattern () const
QString	zPosRoleReplace () const

• 16 public functions inherited from QSurfaceDataProxy
• 1 公共函数继承自 QAbstractDataProxy
• 32 公共函数继承自 QObject

信号

void	autoColumnCategoriesChanged (bool enable )
void	autoRowCategoriesChanged (bool enable )
void	columnCategoriesChanged ()
void	columnRoleChanged (const QString & role )
void	columnRolePatternChanged (const QRegExp & pattern )
void	columnRoleReplaceChanged (const QString & replace )
void	itemModelChanged (const QAbstractItemModel * itemModel )
void	multiMatchBehaviorChanged (MultiMatchBehavior behavior )
void	rowCategoriesChanged ()
void	rowRoleChanged (const QString & role )
void	rowRolePatternChanged (const QRegExp & pattern )
void	rowRoleReplaceChanged (const QString & replace )
void	useModelCategoriesChanged (bool enable )
void	xPosRoleChanged (const QString & role )
void	xPosRolePatternChanged (const QRegExp & pattern )
void	xPosRoleReplaceChanged (const QString & replace )
void	yPosRoleChanged (const QString & role )
void	yPosRolePatternChanged (const QRegExp & pattern )
void	yPosRoleReplaceChanged (const QString & replace )
void	zPosRoleChanged (const QString & role )
void	zPosRolePatternChanged (const QRegExp & pattern )
void	zPosRoleReplaceChanged (const QString & replace )

• 9 信号继承自 QSurfaceDataProxy
• 2 信号继承自 QObject

额外继承成员

• 1 公共槽继承自 QObject
• 11 静态公共成员继承自 QObject
• 9 保护函数继承自 QObject

详细描述

Proxy class for presenting data in item models with Q3DSurface .

QItemModelSurfaceDataProxy allows you to use QAbstractItemModel derived models as a data source for Q3DSurface . It uses the defined mappings to map data from the model to rows, columns, and surface points of Q3DSurface graph.

Data is resolved asynchronously whenever the mapping or the model changes. QSurfaceDataProxy::arrayReset () is emitted when the data has been resolved. However, when useModelCategories property is set to true , single item changes are resolved synchronously, unless the same frame also contains a change that causes the whole model to be resolved.

Mappings can be used in the following ways:

• 若 useModelCategories property is set to true , this proxy will map rows and columns of QAbstractItemModel to rows and columns of Q3DSurface , and uses the value returned for Qt::DisplayRole as Y-position by default. Row and column headers are used for Z-position and X-position by default, if they can be converted to floats. Otherwise row and column indices are used. The Y-position role to be used can be redefined if Qt::DisplayRole is not suitable. The Z-position and X-position roles to be used can be redefined if the headers or indices are not suitable.
• For models that do not have data already neatly sorted into rows and columns, such as QAbstractListModel based models, you can define a role from the model to map for each of row, column and Y-position.
• If you do not want to include all data contained in the model, or the autogenerated rows and columns are not ordered as you wish, you can specify which rows and columns should be included and in which order by defining an explicit list of categories for either or both of rows and columns.

For example, assume that you have a custom QAbstractItemModel storing surface topography data. Each item in the model has the roles "longitude", "latitude", and "height". The item model already contains the data properly sorted so that longitudes and latitudes are first encountered in correct order, which enables us to utilize the row and column category autogeneration. You could do the following to display the data in a surface graph:

QItemModelSurfaceDataProxy *proxy = new QItemModelSurfaceDataProxy(customModel,
                                                                   QStringLiteral("longitude"), // Row role
                                                                   QStringLiteral("latitude"), // Column role
                                                                   QStringLiteral("height")); // Y-position role
					

If the fields of the model do not contain the data in the exact format you need, you can specify a search pattern regular expression and a replace rule for each role to get the value in a format you need. For more information how the replace using regular expressions works, see QString::replace (const QRegExp &rx, const QString &after) function documentation. Note that using regular expressions has an impact on the performance, so it's more efficient to utilize item models where doing search and replace is not necessary to get the desired values.

For example about using the search patterns in conjunction with the roles, see ItemModelBarDataProxy usage in Qt Quick 2 Bars Example .

另请参阅 Qt Data Visualization 数据处理 .

成员类型文档编制

enum QItemModelSurfaceDataProxy:: MultiMatchBehavior

Behavior types for QItemModelSurfaceDataProxy::multiMatchBehavior 特性。

常量	值	描述
QItemModelSurfaceDataProxy::MMBFirst	0	The position values are taken from the first item in the item model that matches each row/column combination.
QItemModelSurfaceDataProxy::MMBLast	1	The position values are taken from the last item in the item model that matches each row/column combination.
QItemModelSurfaceDataProxy::MMBAverage	2	The position values from all items matching each row/column combination are averaged together and the averages are used as the surface point position.
QItemModelSurfaceDataProxy::MMBCumulativeY	3	For X and Z values this acts just like MMBAverage , but Y values are added together instead of averaged and the total is used as the surface point Y position.

特性文档编制

autoColumnCategories : bool

This property holds whether column categories are generated automatically.

当设为 true , the mapping ignores any explicitly set column categories and overwrites them with automatically generated ones whenever the data from the model is resolved. Defaults to true .

访问函数：

bool	autoColumnCategories () const
void	setAutoColumnCategories (bool enable )

通知程序信号：

void	autoColumnCategoriesChanged (bool enable )

autoRowCategories : bool

This property holds whether row categories are generated automatically.

当设为 true , the mapping ignores any explicitly set row categories and overwrites them with automatically generated ones whenever the data from the model is resolved. Defaults to true .

访问函数：

bool	autoRowCategories () const
void	setAutoRowCategories (bool enable )

通知程序信号：

void	autoRowCategoriesChanged (bool enable )

columnCategories : QStringList

This property holds the column categories for the mapping.

访问函数：

QStringList	columnCategories () const
void	setColumnCategories (const QStringList & categories )

通知程序信号：

void	columnCategoriesChanged ()

columnRole : QString

This property holds the item model role to map to the column category.

In addition to defining which column the data belongs to, the value indicated by the column role is also set as the X-coordinate value of QSurfaceDataItem when model data is resolved, unless a separate x position role is also defined.

访问函数：

QString	columnRole () const
void	setColumnRole (const QString & role )

通知程序信号：

void	columnRoleChanged (const QString & role )

columnRolePattern : QRegExp

This property holds whether a search and replace is done on the value mapped by the column role before it is used as a column category.

This property specifies the regular expression to find the portion of the mapped value to replace and the columnRoleReplace property contains the replacement string.

访问函数：

QRegExp	columnRolePattern () const
void	setColumnRolePattern (const QRegExp & pattern )

通知程序信号：

void	columnRolePatternChanged (const QRegExp & pattern )

另请参阅 columnRole and columnRoleReplace .

columnRoleReplace : QString

This property holds the replace content to be used in conjunction with a column role pattern.

Defaults to an empty string. For more information on how the search and replace using regular expressions works, see the QString::replace (const QRegExp &rx, const QString &after) function documentation.

访问函数：

QString	columnRoleReplace () const
void	setColumnRoleReplace (const QString & replace )

通知程序信号：

void	columnRoleReplaceChanged (const QString & replace )

另请参阅 columnRole and columnRolePattern .

itemModel : QAbstractItemModel *

This property holds the item model used as a data source for the 3D surface.

访问函数：

QAbstractItemModel *	itemModel () const
void	setItemModel (QAbstractItemModel * itemModel )

通知程序信号：

void	itemModelChanged (const QAbstractItemModel * itemModel )

multiMatchBehavior : MultiMatchBehavior

How multiple matches for each row/column combination are handled.

默认为 MMBLast .

For example, you might have an item model with timestamped data taken at irregular intervals and you want to visualize an average position of data items on each hour with a surface graph. This can be done by specifying row and column categories so that each surface point represents an hour, and setting this property to MMBAverage .

访问函数：

MultiMatchBehavior	multiMatchBehavior () const
void	setMultiMatchBehavior (MultiMatchBehavior behavior )

通知程序信号：

void	multiMatchBehaviorChanged (MultiMatchBehavior behavior )

rowCategories : QStringList

This property holds the row categories for the mapping.

访问函数：

QStringList	rowCategories () const
void	setRowCategories (const QStringList & categories )

通知程序信号：

void	rowCategoriesChanged ()

rowRole : QString

This property holds the item model role to map to the row category.

In addition to defining which row the data belongs to, the value indicated by the row role is also set as the Z-coordinate value of QSurfaceDataItem when model data is resolved, unless a separate z position role is also defined.

访问函数：

QString	rowRole () const
void	setRowRole (const QString & role )

通知程序信号：

void	rowRoleChanged (const QString & role )

rowRolePattern : QRegExp

This property holds whether a search and replace is performed on the value mapped by the row role before it is used as a row category.

This property specifies the regular expression to find the portion of the mapped value to replace and the rowRoleReplace property contains the replacement string.

访问函数：

QRegExp	rowRolePattern () const
void	setRowRolePattern (const QRegExp & pattern )

通知程序信号：

void	rowRolePatternChanged (const QRegExp & pattern )

另请参阅 rowRole and rowRoleReplace .

rowRoleReplace : QString

This property holds the replace content to be used in conjunction with the row role pattern.

Defaults to an empty string. For more information on how the search and replace using regular expressions works, see QString::replace (const QRegExp &rx, const QString &after) function documentation.

访问函数：

QString	rowRoleReplace () const
void	setRowRoleReplace (const QString & replace )

通知程序信号：

void	rowRoleReplaceChanged (const QString & replace )

另请参阅 rowRole and rowRolePattern .

useModelCategories : bool

This property holds whether row and column roles and categories are used for mapping.

当设为 true , the mapping ignores row and column roles and categories, and uses the rows and columns from the model instead. Defaults to false .

访问函数：

bool	useModelCategories () const
void	setUseModelCategories (bool enable )

通知程序信号：

void	useModelCategoriesChanged (bool enable )

xPosRole : QString

This property holds the item model role to map to the X position.

If this role is not defined, columnRole is used to determine the X-coordinate value of the resolved QSurfaceDataItem 对象。

访问函数：

QString	xPosRole () const
void	setXPosRole (const QString & role )

通知程序信号：

void	xPosRoleChanged (const QString & role )

xPosRolePattern : QRegExp

This property holds whether a search and replace is done on the value mapped by the x position role before it is used as an item position value.

This property specifies the regular expression to find the portion of the mapped value to replace and the xPosRoleReplace property contains the replacement string.

访问函数：

QRegExp	xPosRolePattern () const
void	setXPosRolePattern (const QRegExp & pattern )

通知程序信号：

void	xPosRolePatternChanged (const QRegExp & pattern )

另请参阅 xPosRole and xPosRoleReplace .

xPosRoleReplace : QString

This property holds the replace content to be used in conjunction with an x position role pattern.

Defaults to an empty string. For more information on how the search and replace using regular expressions works, see the QString::replace (const QRegExp &rx, const QString &after) function documentation.

访问函数：

QString	xPosRoleReplace () const
void	setXPosRoleReplace (const QString & replace )

通知程序信号：

void	xPosRoleReplaceChanged (const QString & replace )

另请参阅 xPosRole and xPosRolePattern .

yPosRole : QString

This property holds the item model role to map to the Y position.

访问函数：

QString	yPosRole () const
void	setYPosRole (const QString & role )

通知程序信号：

void	yPosRoleChanged (const QString & role )

yPosRolePattern : QRegExp

This property holds whether a search and replace is done on the value mapped by the y position role before it is used as an item position value.

This property specifies the regular expression to find the portion of the mapped value to replace and the yPosRoleReplace property contains the replacement string.

访问函数：

QRegExp	yPosRolePattern () const
void	setYPosRolePattern (const QRegExp & pattern )

通知程序信号：

void	yPosRolePatternChanged (const QRegExp & pattern )

另请参阅 yPosRole and yPosRoleReplace .

yPosRoleReplace : QString

This property holds the replace content to be used in conjunction with an y position role pattern.

Defaults to an empty string. For more information on how the search and replace using regular expressions works, see the QString::replace (const QRegExp &rx, const QString &after) function documentation.

访问函数：

QString	yPosRoleReplace () const
void	setYPosRoleReplace (const QString & replace )

通知程序信号：

void	yPosRoleReplaceChanged (const QString & replace )

另请参阅 yPosRole and yPosRolePattern .

zPosRole : QString

This property holds the item model role to map to the Z position.

If this role is not defined, rowRole is used to determine the Z-coordinate value of resolved QSurfaceDataItem 对象。

访问函数：

QString	zPosRole () const
void	setZPosRole (const QString & role )

通知程序信号：

void	zPosRoleChanged (const QString & role )

zPosRolePattern : QRegExp

This property holds whether a search and replace is done on the value mapped by the z position role before it is used as an item position value.

This property specifies the regular expression to find the portion of the mapped value to replace and the zPosRoleReplace property contains the replacement string.

访问函数：

QRegExp	zPosRolePattern () const
void	setZPosRolePattern (const QRegExp & pattern )

通知程序信号：

void	zPosRolePatternChanged (const QRegExp & pattern )

另请参阅 zPosRole and zPosRoleReplace .

zPosRoleReplace : QString

This property holds the replace content to be used in conjunction with a z position role pattern.

Defaults to an empty string. For more information on how the search and replace using regular expressions works, see the QString::replace (const QRegExp &rx, const QString &after) function documentation.

访问函数：

QString	zPosRoleReplace () const
void	setZPosRoleReplace (const QString & replace )

通知程序信号：

void	zPosRoleReplaceChanged (const QString & replace )

另请参阅 zPosRole and zPosRolePattern .

成员函数文档编制

QItemModelSurfaceDataProxy:: QItemModelSurfaceDataProxy ( QObject * parent = Q_NULLPTR)

Constructs QItemModelSurfaceDataProxy with optional parent .

QItemModelSurfaceDataProxy:: QItemModelSurfaceDataProxy ( QAbstractItemModel * itemModel , QObject * parent = Q_NULLPTR)

Constructs QItemModelSurfaceDataProxy with itemModel 和可选 parent . Proxy doesn't take ownership of the itemModel , as typically item models are owned by other controls.

QItemModelSurfaceDataProxy:: QItemModelSurfaceDataProxy ( QAbstractItemModel * itemModel , const QString & yPosRole , QObject * parent = Q_NULLPTR)

Constructs QItemModelSurfaceDataProxy with itemModel 和可选 parent . Proxy doesn't take ownership of the itemModel , as typically item models are owned by other controls. The yPosRole role is set to yPosRole . This constructor is meant to be used with models that have data properly sorted in rows and columns already, so it also sets useModelCategories 特性到 true .

QItemModelSurfaceDataProxy:: QItemModelSurfaceDataProxy ( QAbstractItemModel * itemModel , const QString & rowRole , const QString & columnRole , const QString & yPosRole , QObject * parent = Q_NULLPTR)

Constructs QItemModelSurfaceDataProxy with itemModel 和可选 parent . Proxy doesn't take ownership of the itemModel , as typically item models are owned by other controls. The role mappings are set with rowRole , columnRole ，和 yPosRole 。 zPosRole 和 xPosRole are set to rowRole and columnRole ，分别。

QItemModelSurfaceDataProxy:: QItemModelSurfaceDataProxy ( QAbstractItemModel * itemModel , const QString & rowRole , const QString & columnRole , const QString & xPosRole , const QString & yPosRole , const QString & zPosRole , QObject * parent = Q_NULLPTR)

Constructs QItemModelSurfaceDataProxy with itemModel 和可选 parent . Proxy doesn't take ownership of the itemModel , as typically item models are owned by other controls. The role mappings are set with rowRole , columnRole , xPosRole , yPosRole ，和 zPosRole .

QItemModelSurfaceDataProxy:: QItemModelSurfaceDataProxy ( QAbstractItemModel * itemModel , const QString & rowRole , const QString & columnRole , const QString & yPosRole , const QStringList & rowCategories , const QStringList & columnCategories , QObject * parent = Q_NULLPTR)

Constructs QItemModelSurfaceDataProxy with itemModel 和可选 parent . Proxy doesn't take ownership of the itemModel , as typically item models are owned by other controls. The role mappings are set with rowRole , columnRole ，和 yPosRole 。 zPosRole 和 xPosRole are set to rowRole and columnRole , respectively. Row and column categories are set with rowCategories and columnCategories . This constructor also sets autoRowCategories and autoColumnCategories 为 false。

QItemModelSurfaceDataProxy:: QItemModelSurfaceDataProxy ( QAbstractItemModel * itemModel , const QString & rowRole , const QString & columnRole , const QString & xPosRole , const QString & yPosRole , const QString & zPosRole , const QStringList & rowCategories , const QStringList & columnCategories , QObject * parent = Q_NULLPTR)

Constructs QItemModelSurfaceDataProxy with itemModel 和可选 parent . Proxy doesn't take ownership of the itemModel , as typically item models are owned by other controls. The role mappings are set with rowRole , columnRole , xPosRole , yPosRole ，和 zPosRole . Row and column categories are set with rowCategories and columnCategories . This constructor also sets autoRowCategories and autoColumnCategories 为 false。

[virtual] QItemModelSurfaceDataProxy:: ~QItemModelSurfaceDataProxy ()

销毁 QItemModelSurfaceDataProxy .

int QItemModelSurfaceDataProxy:: columnCategoryIndex (const QString & category )

Returns the index of the specified category in the column categories list. If the category is not found, -1 is returned.

注意： If the automatic column categories generation is in use, this method will not return a valid index before the data in the model is resolved for the first time.

void QItemModelSurfaceDataProxy:: remap (const QString & rowRole , const QString & columnRole , const QString & xPosRole , const QString & yPosRole , const QString & zPosRole , const QStringList & rowCategories , const QStringList & columnCategories )

变化 rowRole , columnRole , xPosRole , yPosRole , zPosRole , rowCategories and columnCategories to the mapping.

int QItemModelSurfaceDataProxy:: rowCategoryIndex (const QString & category )

Returns the index of the specified category in the row categories list. If the row categories list is empty, -1 is returned.

注意： If the automatic row categories generation is in use, this method will not return a valid index before the data in the model is resolved for the first time.

void QItemModelSurfaceDataProxy:: setItemModel ( QAbstractItemModel * itemModel )

Sets the item model to itemModel . Does not take ownership of the model, but does connect to it to listen for changes.

注意： Setter 函数对于特性 itemModel .

另请参阅 itemModel ().