PathArc QML Type

Defines an arc with the given radius 更多...

import 语句：

import QtQuick 2.7

所有成员列表，包括继承成员

特性

direction : enumeration
radiusX : real
radiusY : real
relativeX : real
relativeY : real
useLargeArc : bool
x : real
y : real

详细描述

PathArc provides a simple way of specifying an arc that ends at a given position and uses the specified radius. It is modeled after the SVG elliptical arc command.

The following QML produces the path shown below:

Path {
    startX: 100; startY: 0
    PathArc {
        x: 0; y: 100
        radiusX: 100; radiusY: 100
        useLargeArc: true
    }
}

Note that a single PathArc cannot be used to specify a circle. Instead, you can use two PathArc elements, each specifying half of the circle.

另请参阅 路径 , PathLine , PathQuad , PathCubic , PathCurve ，和 PathSvg .

特性文档编制

direction : enumeration

Defines the direction of the arc. Possible values are PathArc .Clockwise (default) and PathArc .Counterclockwise.

The following QML can produce either of the two illustrated arcs below by changing the value of direction.

Path {
    startX: 50; startY: 50
    PathArc {
        x: 150; y: 50
        radiusX: 75; radiusY: 50
    }
}

另请参阅 useLargeArc .

radiusX : real

Defines the radius of the arc.

The following QML demonstrates how different radius values can be used to change the shape of the arc:

Path {
    startX: 0; startY: 100
    PathArc {
        relativeX: 50; y: 100
        radiusX: 25; radiusY: 15
    }
    PathArc {
        relativeX: 50; y: 100
        radiusX: 25; radiusY: 25
    }
    PathArc {
        relativeX: 50; y: 100
        radiusX: 25; radiusY: 50
    }
    PathArc {
        relativeX: 50; y: 100
        radiusX: 50; radiusY: 100
    }
}

radiusY : real

Defines the radius of the arc.

The following QML demonstrates how different radius values can be used to change the shape of the arc:

Path {
    startX: 0; startY: 100
    PathArc {
        relativeX: 50; y: 100
        radiusX: 25; radiusY: 15
    }
    PathArc {
        relativeX: 50; y: 100
        radiusX: 25; radiusY: 25
    }
    PathArc {
        relativeX: 50; y: 100
        radiusX: 25; radiusY: 50
    }
    PathArc {
        relativeX: 50; y: 100
        radiusX: 50; radiusY: 100
    }
}

relativeX : real

Defines the end point of the arc relative to its start.

If both a relative and absolute end position are specified for a single axis, the relative position will be used.

Relative and absolute positions can be mixed, for example it is valid to set a relative x and an absolute y.

另请参阅 x and y .

relativeY : real

Defines the end point of the arc relative to its start.

If both a relative and absolute end position are specified for a single axis, the relative position will be used.

Relative and absolute positions can be mixed, for example it is valid to set a relative x and an absolute y.

另请参阅 x and y .

useLargeArc : bool

Whether to use a large arc as defined by the arc points.

Given fixed start and end positions, radius, and direction, there are two possible arcs that can fit the data. useLargeArc is used to distinguish between these. For example, the following QML can produce either of the two illustrated arcs below by changing the value of useLargeArc.

Path {
    startX: 0; startY: 100
    PathArc {
        x: 100; y: 200
        radiusX: 100; radiusY: 100
        direction: PathArc.Clockwise
    }
}

默认值为 false。

x : real

Defines the end point of the arc.

另请参阅 relativeX and relativeY .

y : real

Defines the end point of the arc.

另请参阅 relativeX and relativeY .